Description
ABB 3HAC10847-1 — Front Ethernet Cable Assembly for S4C+ and IRC5 Robot Controllers
| Item | Detail |
|---|---|
| Part number | 3HAC10847-1 |
| ABB catalog text | Ethernet on front, Harness |
| Component class | Cable assembly, copper only — no active components on it |
| Purpose | Brings the cabinet-face Ethernet socket back to the controller computer so service tools always have a fixed plug-in point |
| Controller families | S4C+ and IRC5 Single, Dual, Panel Mounted and Compact |
| Panel end | RJ45 socket in the front panel, reachable without opening the cabinet door |
| Board end | Plugged into the computer unit header behind the panel board |
| Routing | Short internal run through the front section, dressed clear of the panel board fixings |
| Connection use | Service laptop, RobotStudio, backup and restore, log pulling — separate from the cell network |
| Mass | Around 0.122 kg |
| Origin | Sweden |
| Failure mode | Service link that comes and goes when the front panel is flexed, or a dead socket while the production network stays healthy |
| Swap procedure | Power off, front panel off, unplug both ends, fit the replacement — nothing to configure afterwards |

ABB IGCT Module | ABB ACS6000 | ABB PCS6000 | DSQC

ABB IGCT Module | ABB ACS6000 | ABB PCS6000 | DSQC

ABB IGCT Module | ABB ACS6000 | ABB PCS6000 | DSQC



