Description
ABB 3HAC5566-1 — Drive System Wiring Harness for Axes A1 and A2
| Item | Detail |
|---|---|
| Part number | 3HAC5566-1 |
| ABB catalog description | Wiring harness for drive system A1/A2 |
| Component class | Cable assembly, copper conductors and sleeving only — nothing active on it |
| Function | Carries motor power and motor feedback for axes 1 and 2 from the controller cabinet out to the manipulator |
| Controller generation | S4 and S4C cabinets, the era that ran IRB 2400, IRB 4400 and IRB 6400 arms |
| Cabinet end | Terminates at the drive unit side, plugging into the axis drive outputs and the measurement connections |
| Robot end | Reaches the motor junction at the base of the arm where A1 and A2 connectors sit |
| Construction | Multi-core power conductors bundled with shielded signal pairs in one sleeved run, sized for the current of the two base axes |
| Movement rating | Laid along the dress pack path and flexed continuously with base rotation, so the conductor stranding is fine-pitch rather than solid |
| Shielding | Overall braid plus individual pair screens, with the drain bonded at the cabinet end to keep the encoder signals clean |
| Price band | A cable-level part, sold for tens of dollars on the surplus market — anything quoted in the module bracket is a mislabelled listing |
| Failure signature | Axis overcurrent or position errors that appear only at certain base angles, usually from a broken conductor inside the sleeving rather than a failed drive |

ABB IGCT Module | ABB ACS6000 | ABB PCS6000 | DSQC

ABB IGCT Module | ABB ACS6000 | ABB PCS6000 | DSQC




