Description
ABB 5SXE050151 3BHB003151P104 IGCT Gate Unit
| Parameter | Specification |
|---|---|
| Product category | IGCT gate unit assembly (gate driver board), Generation A platform |
| Model | 5SXE050151, written 5SXE05-0151 on the board |
| Order code | 3BHB003151P104 |
| Mating devices | 5SHX06F6004 (order code 3BHB003387R0101) and 5SHX0660F0002 (order code 3BHB018104R0001), 6 kV / 600 A class F package discs |
| Function | Generates turn-on and turn-off gate current pulses, monitors gate status and reports back to the converter controller |
| Supply voltage | 28–40 V AC square wave (15–100 kHz) or 28–40 V DC at connector X1, no galvanic isolation inside the board |
| Power consumption | 80 W max, start-up current 1.1 A rectified average, internally limited to 7 A |
| Control interface | Fibre optic command signal input and status feedback output over 1 mm plastic optical fibre, minimum ON/OFF pulse 40 µs |
| Connectors | X1 power connector AMP MTA-156 641210-5, receiver Avago HFBR-2528, transmitter Avago HFBR-1528 |
| Diagnostics | Four LEDs: gate OFF green, gate ON yellow, fault or not ready red, supply OK green |
| Mounting | Bolted directly onto the press-pack gate and cathode contact rings, cooled through the device stack |
| Pairing rule and status | Must be quoted and replaced together with its matching disc, not interchangeable with Generation B boards such as 5SXE10-0181; no ABB product page published |

ABB IGCT Module | ABB ACS6000 | ABB PCS6000 | 5SHY

ABB IGCT Module | ABB ACS6000 | ABB PCS6000 | 5SHY





