Description
ABB 5SXE07-0164 Gate Unit
The 5SXE07-0164 is ABB’s design code for the gate unit that drives the 68 mm reverse-conducting IGCT 5SGX1060H0003, the same unit supplied as GV C714 A101 under order code 3BHE024415R0101. It sits beside the device on the clamp assembly, receives its command over a plastic optical fibre and reports ready or fault status back to the converter controller, so no electrical link crosses into the power circuit.
| Parameter | Value |
|---|---|
| Design code | 5SXE07-0164 |
| Type designation | GV C714 A101 |
| Order code | 3BHE024415R0101 |
| Matched device | 5SGX1060H0003 / 5SHX1060H0003, 68 mm RC-IGCT |
| Function | Gate drive, monitoring and status feedback for the IGCT |
| Supply | AC square wave or DC, no galvanic isolation to the power circuit |
| Optical interface | 1 mm plastic optical fibre, separate command and status channels |
| Indication | LED for gate off, gate on, fault and supply healthy |
| Mounting | Fixed to the IGCT clamp assembly, matched to the 68 mm pole piece |
| Typical installation | ACS 5000 and ACS 6000 converter phase modules |
| Ordering note | The unit is normally quoted with the device as one assembly rather than alone |
| Service note | Keep the gate unit generation paired with its IGCT, and confirm the fibre channel wiring against the cabinet drawing |

ABB IGCT Module | ABB ACS6000 | ABB PCS6000 | 5SHY

ABB IGCT Module | ABB ACS6000 | ABB PCS6000 | 5SHY

ABB IGCT Module | ABB ACS6000 | ABB PCS6000 | 5SHY


