Description
- Brand: ABB
- Full Model Number: DSBB110A
- ABB Part Number: 57330001-Y
- Lifecycle Status: Legacy; reported discontinued in a secondary parts catalog. Confirm current OEM support status before procurement.
- Stock & Condition: Physical quantity and unit condition confirmed against the available lot before ordering; dispatch commitment documented on the quotation.
ABB Advant Master -S100 I_O System PDF
Supply Chain & Technical Deep Dive
The investment case depends on the cost of maintaining the installed control system versus the cost and disruption of modifying it. ABB’s available product sheet specifies a net weight of 0.28 kg, but does not state memory capacity, operating voltage, communication protocol, firmware requirements, or expected service life for this board. Those values should not be inferred from unrelated modules. A parts listing identifies the assembly as discontinued by the manufacturer, making condition verification and confirmed delivery timing particularly important. For total cost of ownership (TCO), compare the quoted part price, inspection evidence, warranty terms, installation requirements, and expected downtime exposure before approving the purchase.
Migration, Compatibility & Field Traps
Replacement Matrix
| Evaluation Item | Procurement and Engineering Guidance |
|---|---|
| Exact-part replacement | Preferred when the installed board and replacement both carry DSBB110A / 57330001-Y identification and the physical assembly matches. |
| Drop-in replacement | Candidate only after confirming connector configuration, board revision, mounting arrangement, and system documentation. |
| Software compatibility | No model-specific firmware flash requirement is established by the available product data. Verify the installed Advant Master configuration before commissioning. |
| Alternative part numbers | Do not approve substitutions solely because a supplier describes them as equivalent. Obtain documented engineering approval. |
| Hardware modification | Do not assume modification is permitted. Confirm mechanical and electrical requirements against the applicable OEM documentation. |
Field Traps — Watch Out
- Part identity and connector condition: Match the complete ABB part number before installation. The 99-pin connector is reported in a secondary parts listing; inspect the actual unit for bent pins, oxidation, damaged contacts, and revision differences.
- ESD and live-rack handling: Isolate equipment according to the site’s approved maintenance procedure before removing or installing the board. Use an appropriate ESD-protected work area and approved handling equipment.
- Unverified firmware assumptions: Do not apply a firmware update or controller change based on a generic compatibility claim. Record the controller type, Advant Master software revision, and existing board identification first.
-

ABB Advant Master -S100 I_O System

ABB Advant Master -S100 I_O System

ABB Advant Master -S100 I_O System
Commissioning risk: Confirm that the replacement does not introduce controller diagnostics, communication faults, or unexpected process indications. Follow the site’s approved restoration and rollback procedure.
Main Technical Specifications Summary
Analog Input
Model Specifications DSAI 130A 16 differential channels; ±10 V / ±20 mA; 12-bit + sign bit; CMV ≤50 V; CMRR >100 dB @50 Hz DSAI 133A1 32 single-ended channels; 0~+10 V / 0~+20 mA; 12-bit resolution DSAI 146 Pt100 RTD, 3-wire; 31 measurement channels +1 reference channel; temperature range -100~+320 ℃ / -200~+640 ℃; 12-bit + sign bit DSAI 155A Thermocouple; 14 measurement +2 reference +1 compensation channels; supports B/C/E/J/K/R/S/T types; grounded/floating input; 12/13-bit + sign bit; CMV ≤16 V; CMRR >100 dB @50 Hz





