Description
ABB DSQC 611 3HNA000512-001 — Contactor Interface Board for IRC5 and IRC5P Control Cabinets
| Item | Detail |
|---|---|
| Part number | 3HNA000512-001 |
| ABB type designation | DSQC 611 |
| Board name | Contactor interface board |
| Function | Sits between the controller logic and the main contactor, driving the coil and feeding contactor status back into the safety chain so drive power comes on and drops out in the correct sequence |
| Controller families | IRC5 and the IRC5P paint controllers, where the paint-specific order code carries the same DSQC 611 board |
| Cabinet position | Inside the control module, in the power section next to the contactor and control power supply |
| Logic supply | 24 V DC from the controller’s internal supply |
| Interfaces | Coil drive output to the contactor plus status and interlock signals back to the safety and panel boards |
| Related order code | 3HAC13389-2 for the standard IRC5 variant of the same board |
| Mechanical form | PCB with plug-in connectors and screw fixings, sized for the power section rather than a rack slot |
| Diagnostics | Fault reporting comes through the controller event log rather than dedicated indicators, so read the log before pulling the board |
| Failure signature | Contactor that will not pull in, repeated “motors on” failures, or drive power dropping straight back out after a start command with the safety chain otherwise healthy |
| Replacement | Main switch off, connectors unplugged, board swapped — no configuration download needed, the board carries no software |

ABB IGCT Module | ABB ACS6000 | ABB PCS6000 | DSQC

ABB IGCT Module | ABB ACS6000 | ABB PCS6000 | DSQC

ABB IGCT Module | ABB ACS6000 | ABB PCS6000 | DSQC



