Description
ABB PPC380AE01 HIEE300885R0001 Control Board
| Attribute | Rating |
|---|---|
| Product type | Printed-circuit controller board for ABB excitation and power-converter cabinets, plug-in card format |
| Type code | PPC380 AE01, printed on the board front label |
| ABB order code | HIEE300885R0001 |
| Function class | Processor / regulation board handling the excitation control loop and the interface to the cabinet’s thyristor stage |
| Host systems | ABB UNITROL class excitation cabinets; listed by trade channels as a high-performance processor board |
| Reported processing hardware | 1.2 GHz ARM Cortex-A9 class dual-core, 1 GB RAM, 4 GB flash with a Linux runtime — figures from a single listing, treat as indicative rather than ABB-confirmed |
| Network | Dual Ethernet ports in the 10/100/1000 class on the reported configuration |
| Signals | Backplane interface plus front-panel service and diagnostic connectors; field wiring lands on the cabinet terminal blocks |
| Supply | Cabinet-internal low-voltage DC rail; no card-level data sheet is published |
| Firmware / project | Configuration and the excitation parameter set live with the cabinet; a replacement board needs the project downloaded before it will run in closed loop |
| Environmental | Conformally coated PCB, cabinet-mounted, IP20 in service |
| Spare route | New-old-stock and repair exchange both common; these boards are usually repairable at ABB service centres |
| Compatibility | Revision letter after AE and the firmware level both matter — a mismatched board boots but reports communication or configuration faults |
| Handling | Cabinet off and field discharge proven, ESD strap on, original board photographed for jumper and connector comparison |

ABB AC 800PEC | PEC 800 | PowerPC | PPD | PPC

ABB AC 800PEC | PEC 800 | PowerPC | PPD | PPC




