Description
ABB PPD113 3BHE023584R2634 AC 800PEC Controller
The PPD113 is the AC 800PEC high-speed controller module used for power electronics and drive control, combining a 750 MHz PowerPC processor with an FPGA and a set of optical and fieldbus interfaces. It mounts on the AC 800PEC backplane and runs the fast control loops that sit underneath the plant controller.
| Parameter | Value |
|---|---|
| Product | AC 800PEC controller, PP D113 |
| Order code | 3BHE023584R2634, variant in the B03 series |
| CPU | PowerPC 750FX RISC at 750 MHz with 64-bit IEEE floating-point unit |
| Working memory | 64 MB SDRAM |
| Program storage | 16 MB Flash, retained without battery backup |
| Typical control cycle | About 25 µs for fast tasks |
| I/O architecture | AnyIO slots plus an AnyBus-S slot on the processor module |
| Optical interfaces | Up to six optical module slots on the backplane for converter links |
| Communication | Two Ethernet ports and an RS-232 service port |
| Programming | MATLAB/Simulink model-based code, plus the AC 800PEC toolchain |
| Module dimensions | 450 × 100 × 150 mm |
| Gross weight | About 2.45 kg for recorded variants |
| Mounting | AC 800PEC backplane, DIN rail or cabinet mounted |
| Lifecycle | Active; firmware state depends on the variant suffix |
| Service note | The suffix after B03 defines the I/O load-out and whether firmware is included, so quote it in full |

ABB IGCT Module | ABB ACS6000 | ABB PCS6000 | PPD

ABB IGCT Module | ABB ACS6000 | ABB PCS6000 | PPD

ABB IGCT Module | ABB ACS6000 | ABB PCS6000 | PPD




