Description
ABB UFC092BE01 HIEE300910R1 Binary Input Board
| Attribute | Rating |
|---|---|
| Product type | Printed-circuit input board for ABB excitation and drive cabinets, plug-in card format |
| Type code | UF C092 BE01, printed on the board front label |
| ABB order code | HIEE300910R1 |
| Function class | Binary input board — reads switch and contact status from the cabinet wiring and hands them to the controller over the backplane |
| Reported roles | Trade listings call it a binary input board, an input module, a digital voltage regulator and a power supply module; the binary input reading is the only one consistent with the UFC numbering pattern |
| Supply | Cabinet-internal low-voltage DC rail; no ABB data sheet is published, measure at the connector before replacing |
| Inputs | Opto-isolated digital inputs with common reference per group; exact channel count varies with the cabinet variant |
| Signal level | Standard 24 V DC class field signals through the cabinet interface |
| Dimensions / weight | Roughly 130 × 380 × 60 mm and about 1 kg per the most specific listing |
| Mounting | Slide-in card, front panel with retaining screws, keyed backplane connector |
| Environmental | Conformally coated PCB for cabinet service |
| Spares route | New-old-stock and repaired exchange both available; input boards are commonly repairable |
| Compatibility | Channel mapping and common-reference grouping differ between revisions — cross-revision substitution gives inverted or dead channels rather than a total failure |
| Handling | Cabinet power off, ESD protection, verify DIP/SW1 settings against the original board before fitting |

ABB Moule | UAC | UAD | UCD | UFC | UFD | UNC

ABB Moule | UAC | UAD | UCD | UFC | UFD | UNC

ABB Moule | UAC | UAD | UCD | UFC | UFD | UNC


