Description
ABB UFC911B101 3BHE037864R0101 Control Board
| Attribute | Rating |
|---|---|
| Product type | Control board (listed by ABB under the DCS CPU card category), plug-in rack card for power-electronics cabinets |
| Model designation | UFC911B101 |
| ABB order code | 3BHE037864R0101 |
| Function | Control processing plus interface between the cabinet control electronics and the power section; a failure here trips the whole cabinet |
| Host systems | ABB UNITROL excitation systems and ACS1000 / ACS5000 medium-voltage drive cabinets |
| Supply | 24 V DC on the cabinet rail |
| Coating / protection | Conformal coated board for corrosive-gas environments; IP20 when installed in the cabinet |
| Mounting | Plug-in rack slot with front panel, keyed connector |
| Processing | Board-resident control firmware; the drive or excitation project lives in the cabinet and must be backed up before a swap |
| Origin | Germany per the trade channel; confirm on the packing label |
| Product status | Spare part for installed systems, still quoted as a current spare by ABB part channels |
| Suffix variants | The UFC911 family carries several suffixes with different hardware and pin assignment — a neighbouring variant fits the slot but behaves differently |
| Firmware rule | Replacement board must carry the same or a higher firmware level than the cabinet expects; a lower level is rejected at start-up and looks like a hardware fault |
| Handling | Cabinet power off and DC link discharged, ESD strap, project backup taken, I/O mapping and power-section feedback verified after the download |

ABB Moule | UAC | UAD | UCD | UFC | UFD | UNC

ABB Moule | UAC | UAD | UCD | UFC | UFD | UNC

ABB Moule | UAC | UAD | UCD | UFC | UFD | UNC


