Description
ABB UFC921A101 3BHE024855R0101 Inverter Board
| Attribute | Rating |
|---|---|
| Product type | Inverter / power-stage driver board, plug-in card for ABB excitation and drive cabinets |
| Model designation | UF C921 A101 |
| ABB order code | 3BHE024855R0101 |
| Function | Drives the converter switching devices of the cabinet and reports status back to the controller; listed by trade channels as the inverter board of UNITROL excitation systems |
| Host systems | ABB UNITROL excitation cabinets; some listings also place it in ACS drive cabinets, which reflects resale filing rather than ABB documentation |
| Supply | Cabinet-internal low-voltage DC rail; ABB publishes no card-level data sheet, so verify at the connector |
| Output stage | Gate command outputs to the power devices with isolated drive and fault feedback |
| Dimensions | Roughly 257 × 125 × 30 mm per the most specific listing |
| Weight / packing | Board only, sub-kilogram; shipping weight dominated by carton and ESD packaging |
| Environmental | Conformally coated PCB, cabinet-mounted, IP20 in service |
| Mounting | Slide-in rack card with front panel and keyed connector |
| Product status | Spare part for installed excitation systems; replacement stock comes from new-old-stock and repair channels |
| Compatibility | Revision and firmware must match the cabinet — a board from a different excitation generation fits the slot but produces wrong firing pattern and trips on start-up |
| Handling | Cabinet power off and DC link discharged, ESD strap, original board photographed for jumper and connector comparison before fitting |

ABB Moule | UAC | UAD | UCD | UFC | UFD | UNC

ABB Moule | UAC | UAD | UCD | UFC | UFD | UNC

ABB Moule | UAC | UAD | UCD | UFC | UFD | UNC


