Description
- Brand: Bently Nevada
- Full Model Number: 132417-01
- Lifecycle Status: Legacy / Obsolescence-risk
- Core Function: Four-channel machinery monitoring module for the Bently Nevada 2201 monitoring system
- Top 3 Technical Specs: 4-channel monitoring | 2201 monitoring platform | Associated Solar Turbines P/N 190662-26
- Stock & Condition: Physical stock confirmation required | New Surplus / Tested Refurbished by lot | Emergency dispatch subject to inventory and carrier cutoff
Module 3: Obsolescence & Supply Chain Deep Dive
A failed monitoring module on a turbine can leave otherwise serviceable machinery without the required measurement and alarm functions. Bently Nevada 132417-01 is identified in current parts references as a four-channel monitor module associated with the 2201 monitoring system, with 190662-26 listed as the associated Solar Turbines part number. Current repair documentation also identifies 132417-01 specifically as a Bently Nevada four-channel monitor module. For maintenance teams supporting older turbine-monitoring installations, the key procurement issue is matching the complete part number and application rather than assuming that another Bently Nevada monitoring card is electrically equivalent.
From a TCO perspective, a verified replacement can preserve the installed monitoring architecture and reduce the scope of a larger modernization project. The purchase cost is only one variable; avoided turbine downtime, engineering review, field installation, alarm verification, and recommissioning often carry greater financial impact. The current market also shows 132417-01 paired with 190662-26, which is useful when cross-checking turbine documentation and asset records. (For legacy machinery-monitoring hardware, exact surplus inventory can shorten the recovery cycle when normal factory supply is no longer practical.)
Bently Nevada 132417-01
Module 4: Compatibility & Replacement Matrix
| Purchase Review Item | Engineering Guidance |
|---|---|
| Replacement Classification | Drop-in Replacement — conditional |
| Hardware Modification | Normally none for an exact 132417-01 system match |
| Primary Platform | Bently Nevada 2201 Monitoring System |
| Channel Configuration | Four-channel monitor |
| Associated Part Number | 190662-26 |
| Software Compatibility | Verify installed monitoring configuration before replacement |
| Typical Switch Time | ~2–6 labor hours for module replacement and functional verification |
| Typical Engineering Cost | Approximately 300–1,200 excluding turbine outage and site travel |
| Recommended Migration Path | Record installed module ID → document settings → verify 132417-01/190662-26 match → replace → verify channels and alarms → return to service |
Current equipment records identify 132417-01 as a four-channel Bently Nevada monitor module and associate it with Solar Turbines P/N 190662-26.
Field Traps — Watch Out
- Part-number mismatch: Do not approve a replacement based solely on the phrase “four-channel monitor.” Verify 132417-01 and, where applicable, the associated 190662-26 identifier against the installed equipment documentation.
- Application mismatch: Verify the installed 2201 system configuration, sensor types, channel assignments, alarm thresholds, and field termination arrangement before energizing the replacement.
Module 5: Quality Assurance & Testing SOP
A strict pre-shipment inspection for Bently Nevada 132417-01 should include:
- Identity verification: Confirm 132417-01, associated 190662-26 identification where present, serial number, labels, connectors, and physical configuration.
- OEM anti-counterfeit visual inspection: Examine Bently Nevada markings, PCB identifiers, labels, component placement, connectors, solder work, and evidence of unauthorized rework.
- Mechanical inspection: Check housing, card edge, mounting hardware, connector pins, and PCB surfaces for corrosion, cracks, contamination, or impact damage.
- Power-on self-test (POST): Install the module in an approved 2201 test configuration and verify startup diagnostics and normal status indications.
- Channel verification: Test all four monitoring channels independently using calibrated simulated inputs appropriate to the installed application.
- Signal measurement test: Verify stable measurement response and expected channel behavior across representative operating points.
- Alarm test: Exercise applicable warning and trip thresholds and confirm correct alarm-state transitions.
- Output verification: Test any applicable buffered or recorder outputs associated with the configured monitoring path.
- Sensor-interface test: Verify compatibility with the intended probe or transducer type before shipment approval.
- Extended run check: Monitor the module for intermittent resets, unstable readings, diagnostic faults, or channel dropouts.
- Final QC: Record serial number, channel test data, alarm results, condition grade, inspection photographs, and packaging approval.
Independent equipment records consistently describe the unit as a four-channel monitor, reinforcing the need for four-channel functional testing rather than a simple power-up inspection.
Module 6: Procurement & Lifecycle FAQ
Is Bently Nevada 132417-01 genuinely in stock, and what is the cutoff for emergency shipping?
Physical inventory should be confirmed against the exact 132417-01 part number before PO release. Emergency dispatch depends on stock location, payment clearance, export documentation, and the carrier’s daily pickup schedule.
How do you verify the condition and authenticity of this obsolete monitor?
Require part-number and serial verification, OEM marking inspection, PCB and connector examination, power-up diagnostics, four-channel measurement testing, alarm verification, and documented final QC. The supplied condition should be clearly identified as New Surplus or Tested Refurbished.
What is the relationship between 132417-01 and 190662-26?
Current equipment references associate Bently Nevada 132417-01 with Solar Turbines part number 190662-26 and identify the unit as a four-channel 2201 monitor. Procurement should cross-check both identifiers against the installed asset documentation.
Can 132417-01 be installed as a direct replacement?
Treat it as a conditional drop-in replacement. Before installation, confirm the 2201 system configuration, four-channel assignment, sensor interfaces, alarm settings, wiring, and the exact part-number match.
What warranty and return terms should procurement require?
The quotation should specify the exact 132417-01 part number, associated part number where applicable, condition grade, serial traceability, pre-shipment test scope, warranty duration, DOA coverage, and return authorization procedure. Current repair-service listings for this model advertise 12-month whole-unit warranty coverage, which is a useful benchmark when evaluating supplier terms.
Start Chat
