1. AMAT 3620-0084 | Original Process Tool Spare Unit

2. Unboxing & Physical Snapshot

• Brand & Model: AMAT 3620-0084
• Manufacturer: Applied Materials (AMAT). Applied Materials designs, manufactures, and services semiconductor production equipment used in wafer fabrication facilities.
• Product Type: Applied Materials OEM semiconductor equipment spare component. The exact assembly function is tool-platform dependent and should be confirmed through the applicable AMAT service documentation.
• Primary Application: Semiconductor process equipment maintenance, wafer fabrication tool repair, and cleanroom equipment servicing.
• Physical Dimensions (Approximate W × H × D):
  • Estimated: 200 × 150 × 80 mm
  • Actual dimensions depend on the equipment assembly configuration.
• Estimated Shipping Weight: Approximately 0.5–1.5 kg including protective packaging.
• What’s in the Box:
  • AMAT 3620-0084 OEM spare component
  • Manufacturer identification label
  • ESD shielding packaging (for electronic assemblies)
  • Protective transport packaging
  • Documentation or inspection records when supplied

3. Product Introduction

Structure C — Compliance Hook

The AMAT 3620-0084 is a controlled semiconductor equipment spare part intended for use within Applied Materials manufacturing systems, where exact part identity, revision control, and contamination management are essential. Applied Materials equipment operates in highly controlled fabrication environments where replacement hardware must match approved equipment configurations.

Do not classify this item as a general industrial replacement. Semiconductor tools depend on precise mechanical interfaces, electrical characteristics, and equipment-specific qualification records (—which is critical when restoring production tools during scheduled maintenance windows). Verify the part number label, revision marking, and supported AMAT platform before installation.

4. Core Technical Specifications

Parameter	Value
Manufacturer	Applied Materials
Part Number	3620-0084
Product Category	OEM Semiconductor Equipment Spare
Equipment Application	Wafer fabrication equipment
Component Type	Tool-specific replacement assembly
Installation Environment	Semiconductor cleanroom system
Power Requirement	Equipment dependent
Communication Interface	Equipment dependent
Memory	Not confirmed; depends on assembly type
Firmware	Not confirmed; depends on assembly type
Heat Dissipation	Application dependent
Mounting Method	OEM equipment-specific mounting interface
Operating Temperature	Controlled equipment environment
Storage Temperature	Controlled warehouse conditions
Humidity Requirement	Dry storage, below 60% RH recommended
Weight	Approximately 0.5–1.5 kg

AMAT 3620-0084

The exact electrical specifications, compatible tool models, and replacement procedures require confirmation against the AMAT equipment documentation and asset records. Applied Materials manages equipment and service components according to specific tool configurations.

5. ? Global Compliance & Industry Certifications

Expected compliance considerations for the AMAT 3620-0084 include:

• CE Mark — may apply when installed as part of a compliant Applied Materials equipment system.
• UL/cUL Recognition — may apply depending on the complete equipment electrical certification.
• SEMI Standards Compatibility — semiconductor manufacturing equipment commonly follows SEMI safety and facility integration requirements.
• RoHS Compliance — may apply depending on manufacturing date and regional regulations.
• ATEX/IECEx — generally not applicable unless the specific assembly is designed for hazardous-area equipment.
• Marine Approvals (DNV GL) — generally not applicable for semiconductor fabrication equipment.

For semiconductor facilities, compliance extends beyond electrical approvals. Traceability, contamination control, and documented replacement history are frequently reviewed during equipment qualification audits.

Verify specific lot certifications with OEM.

6. ? Long-Term Storage & Asset Preservation Guide

Keep the AMAT 3620-0084 inside the original packaging whenever possible. Semiconductor equipment spares require controlled storage because small contamination or oxidation issues can affect installation acceptance.

Maintain warehouse humidity below 60% RH. Excess moisture can degrade connectors, plated surfaces, seals, and electronic assemblies over extended storage periods.

Before installation:

• Inspect the packaging seal for moisture exposure or damage.
• Verify the OEM label and revision information against inventory records.
• Check connectors, mounting surfaces, and fasteners for oxidation.
• Allow the component to stabilize in the cleanroom environment before opening sealed packaging.

For electronic variants, keep the assembly inside the original anti-static (ESD) shielding bag until installation.

7. Physical Installation Prerequisites

• Confirm compatibility with the specific Applied Materials tool model.
• Follow semiconductor cleanroom handling procedures.
• Use ESD protection when handling electronic assemblies.
• Verify mounting orientation and mechanical alignment.
• Confirm grounding connections where electrical interfaces are present.
• Maintain equipment airflow and thermal clearance requirements.
• Record serial number, revision, and installation history.

Leave sufficient clearance around the installed assembly for inspection, service access, and future replacement activities.

8. Buyer’s FAQ (Logistics & Compliance Focus)

Q1. What HS Tariff Code is commonly used for AMAT 3620-0084?

A: The final Harmonized System classification depends on the actual function of the component and customs interpretation in the destination country. Semiconductor equipment spare parts may be classified differently depending on whether the item is an electronic assembly, mechanical component, or control-related unit. Confirm the final HS code with your customs broker.

Q2. Does Country of Origin affect AMAT 3620-0084 import documentation?

A: Yes. COO information supports customs clearance, customer qualification requirements, and semiconductor equipment traceability. Maintain the OEM label, commercial invoice, packing list, and receiving inspection records together.

Q3. Is shipping insurance recommended for this spare part?

A: Recommended. Semiconductor equipment components may have high replacement value despite limited physical size. Impact damage, moisture exposure, or packaging failure can affect acceptance during installation.

Q4. Does AMAT 3620-0084 include the latest firmware pre-loaded?

A: This depends on the actual assembly type. Many AMAT spare parts are passive hardware components without firmware. If the item contains electronic control functions, verify software revision, hardware revision, and tool compatibility before commissioning.