AMAT 1140-01634 | UL/CE Industrial Power Supply

Description

1. AMAT 1140-01634 | UL/CE Industrial Power Supply

Unboxing & Physical Snapshot

• Model & Brand: AMAT 1140-01634 (Applied Materials)
• OEM Reference: XP Power X9-4U4U-0012 / MPN 102290-01 (reported cross-reference)
• Product Type: Industrial Power Supply Assembly
• Application: Semiconductor manufacturing equipment power conversion module used in Applied Materials wafer fabrication equipment platforms. Exact tool compatibility should be confirmed against the equipment BOM and revision-controlled spare list.
• Approximate Physical Dimensions (W × H × D):
  • Estimated: 127 × 76 × 305 mm
  • Final dimensions depend on enclosure revision and installed connector configuration.
• Estimated Shipping Weight: Approximately 2.0–3.0 kg including ESD protection and export packaging.
• What’s in the Box:
  • AMAT 1140-01634 power supply assembly
  • XP Power supply chassis/module (if supplied as cross-reference)
  • Input/output connector interfaces
  • Mounting hardware where applicable
  • Anti-static protective packaging
  • Inspection label and traceability documentation when supplied

Product Introduction

Semiconductor fabrication equipment depends heavily on controlled power delivery. The AMAT 1140-01634 is a dedicated equipment power assembly designed for integration into Applied Materials process tool platforms. The module provides regulated electrical power conversion for sensitive control electronics and subsystems, where voltage stability directly affects equipment availability and process repeatability. (Power assemblies inside fabs are often treated as controlled maintenance assets rather than ordinary replacement parts.)

Handle this unit as a precision electronic subsystem. Inspect the enclosure, cooling surfaces, terminal connections, and identification labels before installation. Check the date code. Long-stored power supplies require careful evaluation because electrolytic capacitors, insulation materials, and cooling components age even when the equipment is not energized.

Core Technical Specifications

AMAT 1140-01634

Global Compliance & Industry Certifications

Expected compliance considerations for the AMAT 1140-01634 include:

• CE Mark for applicable electromagnetic compatibility and low-voltage requirements.
• UL/cUL Listed or Recognized status depending on the exact XP Power configuration and final equipment installation.
• RoHS / REACH compliance documentation may be required for semiconductor equipment supply chains. Applied Materials maintains restricted substance requirements for supplied parts and products.
• IEC safety standards applicable to industrial power conversion equipment.
• ATEX/IECEx generally not expected for standard semiconductor fab equipment power supplies unless installed in classified hazardous environments.
• Marine approvals such as DNV GL are generally not applicable unless incorporated into a marine-certified equipment package.

UL recognition is important because power supplies operate directly on mains-related energy conversion circuits; certification helps demonstrate controlled insulation, protection, and electrical safety design.

Verify specific lot certifications with OEM.

Long-Term Storage & Asset Preservation Guide

• Store the AMAT 1140-01634 inside its original anti-static (ESD) packaging. Keep connectors covered to prevent oxidation and contamination.
• Maintain warehouse humidity below 60% RH. Moisture can degrade insulation materials, terminal contacts, and internal PCB coatings.
• For extended storage beyond two years, inspect and document capacitor condition before installation. Power supplies with aging electrolytic capacitors may require controlled re-energization procedures.

Do not assume shelf condition equals operating condition.

Keep the cooling openings clean. Dust accumulation inside stored power assemblies can become a thermal issue after startup.

Physical Installation Prerequisites

• Install only in the approved Applied Materials equipment chassis location.
• Confirm input/output connector orientation before mounting.
• Verify AC input isolation and grounding before replacement work.
• Ensure protective earth bonding is correctly connected.
• Maintain equipment airflow paths. Leave approximately 50 mm clearance around ventilation areas where the machine design allows.
• Inspect mounting brackets, retaining screws, and connector locks.
• Use grounded ESD protection during handling.
• Confirm output voltage specifications before connecting downstream electronics.

Buyer’s FAQ (Logistics & Compliance Focus)

Q: What HS Tariff Code is commonly reviewed for the AMAT 1140-01634?
A: Industrial power supply assemblies are commonly evaluated under HS 8504 categories for electrical transformers, static converters, and power supply equipment. Final classification depends on the exact electrical characteristics and importing-country customs requirements.

Q: Why does Country of Origin (COO) documentation matter for this AMAT spare?
A: COO supports customs clearance, semiconductor equipment supplier audits, and maintenance traceability. The COO should match the commercial invoice, packing list, and equipment identification records.

Q: Is shipping insurance recommended for this power supply?
A: Yes. Semiconductor equipment spares often have high operational value because downtime costs exceed component value. Use anti-static packaging, shock protection, moisture control, and declared-value insurance.

Q: Does the AMAT 1140-01634 include the latest firmware pre-loaded?
A: No. This is a power supply assembly and does not contain application firmware or user memory. Any equipment software configuration resides in the Applied Materials control system hardware.