1. B&R 8AC110.60-2 | Industrial CAN Bus Interface Spare

2. Unboxing & Physical Snapshot

• Brand & Model: B&R Automation 8AC110.60-2
• Product Family: B&R ACOPOS Plug-in Modules
• Product Type: CAN interface plug-in module for ACOPOS servo drives. The module provides CAN communication and configuration capability for ACOPOS drive systems used in standard motion-control applications.
• Primary Application: Servo drive communication, motion-control networks, machine automation systems, and ACOPOS drive cabinet installations.
• Physical Dimensions (Approximate W × H × D):
  • Approximately 40 × 120 × 80 mm (plug-in module format; exact dimensions depend on ACOPOS carrier installation)
• Estimated Shipping Weight: Approximately 0.1–0.3 kg including ESD protection and export packaging.
• What’s in the Box:
  • B&R 8AC110.60-2 ACOPOS CAN interface module
  • Identification label
  • Protective ESD packaging
  • Installation documentation when supplied

3. Product Introduction

Structure B — Architecture Hook

The B&R 8AC110.60-2 is installed as an expansion interface inside an ACOPOS servo drive, adding CAN network communication capability to the motion-control architecture. It occupies a dedicated ACOPOS plug-in slot and provides the physical interface required for CAN-based communication and drive configuration tasks.

This module is a communication accessory, not a standalone controller. Confirm the ACOPOS drive model, slot position, CAN network design, and node addressing before replacement. Inspect the DSUB connector, module housing, and retaining mechanism carefully (—which is critical in high-cycle machine environments where vibration can affect communication hardware).

4. Core Technical Specifications

Parameter	Value
Manufacturer	B&R Industrial Automation
Model Number	8AC110.60-2
Product Family	ACOPOS Plug-in Modules
Module Type	CAN Interface Module
Application	ACOPOS servo drive communication
B&R ID Code	0x1198
Installation Slot	Slot 1
Communication Interface	CAN
Connector Type	9-pin male DSUB
CAN Baud Rate	500 kbit/s
Maximum Communication Distance	60 m
Electrical Isolation	Yes
Status Indicators	RXD/TXD LEDs
Network Capability	CAN network compatible
Power Consumption	Max. 0.7 W
Operating Temperature	5°C to 40°C nominal
Maximum Operating Temperature	55°C
Storage Temperature	-25°C to 55°C
Humidity	5–95% RH depending on condition

B&R 8AC110.60-2

The 8AC110.60-2 extends ACOPOS drive communication capability through CAN networking. Configuration depends on the installed servo drive platform and Automation Studio project settings.

5. ? Global Compliance & Industry Certifications

Expected regulatory approvals for the B&R 8AC110.60-2 include:

• CE Mark — confirmed for the module according to B&R technical documentation.
• UL/cULus Recognition (E225616) — listed under power conversion equipment certification scope.
• KC Certification — applicable for Korean market requirements.
• ATEX/IECEx — not a standalone hazardous-area certified communication module; suitability depends on the complete servo drive installation.
• Marine Approvals (DNV GL) — only applicable when integrated into an approved marine automation system.

For motion-control communication modules, certification confirms electrical compatibility and safe integration within approved drive systems.

Verify specific lot certifications with OEM.

6. ? Long-Term Storage & Asset Preservation Guide

Store the 8AC110.60-2 in its original anti-static (ESD) packaging. The DSUB connector pins and PCB contacts should remain protected from dust and oxidation.

Maintain warehouse humidity below 60% RH whenever possible. Excess moisture can degrade connector surfaces and internal PCB protection materials.

Before installation:

• Inspect the DSUB connector for bent pins or corrosion.
• Verify the module identification label matches the required ACOPOS configuration.
• Confirm CAN node settings and communication parameters.
• Check the retaining clips and mechanical mounting surfaces.
• Avoid touching PCB contacts directly during handling.

Keep the module together with its machine documentation. A correct hardware replacement still requires matching software configuration.

7. Physical Installation Prerequisites

• Install only into a compatible B&R ACOPOS servo drive.
• Confirm the correct plug-in slot before insertion.
• Disconnect power before opening the drive housing.
• Use ESD protection during handling.
• Verify CAN cable shielding and grounding practices.
• Confirm DSUB connector locking screws are secured.

Maintain sufficient cabinet airflow around the ACOPOS drive assembly. Leave adequate clearance around the drive housing for heat removal and maintenance access.

8. Buyer’s FAQ (Logistics & Compliance Focus)

Q1. What HS Tariff Code is commonly used for the B&R 8AC110.60-2?

A: The final Harmonized System classification depends on customs interpretation and the declared function of the communication module. Industrial automation interface modules are commonly reviewed under electrical control equipment categories. Confirm the final HS code with your customs broker.

Q2. Does Country of Origin affect 8AC110.60-2 import clearance?

A: Yes. COO documentation supports customs processing, equipment traceability, and audit records. Maintain the OEM label, commercial invoice, packing list, and inspection documents together.

Q3. Is shipping insurance recommended for this CAN interface module?

A: Recommended. The module is compact but contains sensitive electronic components and precision connectors. Shock, moisture, or ESD exposure during transport can cause communication failures.

Q4. Does the 8AC110.60-2 include the latest firmware pre-loaded?

A: The module is a CAN interface accessory and does not operate as a standalone programmable controller. Firmware and configuration depend on the ACOPOS drive system and Automation Studio project settings.