Description
Because no reliable OEM datasheet for the exact BK698A201S12 was located, specifications that cannot be independently corroborated are deliberately left as to be verified.
Product Overview
The BK698A201S12 is consistently listed as a GE industrial automation spare part, and the exact part number appears in multiple GE automation inventories.
Part-specific descriptions, however, do not agree on the exact function. One current listing identifies it as a fiber-optic communication / ultra-fast data transmission module, while another describes it generically as a GE control module.
The same part number is also shown together with GE legacy automation components such as BK698CPA15B0, D20, VMIVME, IC698, and other control-system hardware, indicating that it belongs to the broader legacy GE industrial-control inventory.
Identification and Configuration
The BK698A201S12 should be identified by the complete catalog number rather than by a generic description such as “GE communication module.”
For purchasing and engineering records, the following information should be captured from the physical unit:
| Identification Item | Recommended Check |
|---|---|
| Catalog number | BK698A201S12 |
| Board/module revision | Check PCB and nameplate markings |
| Serial number | Record for traceability |
| Connector layout | Compare with the installed unit |
| Optical/electrical interfaces | Confirm actual interface type |
| Host rack or controller | Identify the GE system in which it is installed |
| Firmware or configuration labels | Record where applicable |
| Factory labels | Photograph all identification markings |
GE BK698A201S12
Replacement Considerations
A direct substitution should not be made solely because another GE module has a similar physical appearance.
The available market evidence shows that BK698A201S12 is sold alongside a wide range of GE legacy control hardware, but it does not establish a universal cross-reference or a current OEM replacement.
Before ordering a replacement, verify the:
- Complete part number and revision
- Host GE control platform
- Connector and interface arrangement
- Application-specific configuration
- Firmware or stored configuration
- Electrical supply requirements
- Any fiber-optic or network-interface requirements
Lifecycle Considerations
The appears to be a legacy GE automation component. Current specialist suppliers continue to list the exact part number, including used/tested inventory, indicating secondary-market availability.
A current e-commerce listing shows the exact part as used and tested, while specialist automation sites continue to categorize it as GE industrial-control hardware.
For critical assets, procurement should therefore focus on exact-part-number matching and tested replacement condition rather than assuming a generic GE module will provide equivalent functionality.
Important Specification Note
Several websites publish highly specific technical claims for , including surge-protection architecture, ±10 kA surge current, sub-nanosecond response, CANopen/RS-485/Modbus/4–20 mA support, IP67 protection, and −20 to +80 °C operation. Those claims appear on a reseller page and are not sufficiently supported by an OEM source for this exact GE part number, so they should not be treated as confirmed specifications.
Likewise, the 24 V / 5 A specification found on another reseller page should be considered unverified for engineering use.
FAQ
It is a legacy GE industrial automation module. Current specialist listings identify it as a GE control/communications-related module, but the exact OEM function should be verified from the installed system or original documentation.
There is insufficient reliable evidence to classify it as a standalone PLC CPU.
Is it a fiber-optic communication module?
One specialist listing gives that description, but it has not been corroborated by a GE OEM document located for the exact part number.
What voltage and current does it require?
A reseller lists 24 V and 5 A, but this information is not sufficiently verified for engineering specification purposes.
Yes, the exact part number continues to appear in specialist and secondary-market inventories.
What should be confirmed before replacement?
Confirm the complete part number, hardware revision, host GE platform, connectors, interface type, electrical requirements, and configuration against the installed unit.
Start Chat
