1. AMAT 0190-87725 | Original Vacuum Equipment Spare

2. Unboxing & Physical Snapshot

• Model & Brand: Applied Materials (AMAT) 0190-87725 Semiconductor Equipment Spare Part. This part number belongs to the Applied Materials semiconductor equipment spare-part ecosystem. Exact tool assignment and revision should be verified against the equipment BOM before installation.
• Product Type: Semiconductor manufacturing equipment mechanical/process component.
• Physical Dimensions (Approximate W × H × D): Estimated 100 × 100 × 50 mm (3.9 × 3.9 × 2.0 in.) depending on assembly revision and installed hardware.
• Estimated Shipping Weight: Approximately 0.3–1.0 kg (0.7–2.2 lb) including clean protective packaging.
• What’s in the Box:
  • AMAT 0190-87725 component assembly
  • Cleanroom protective packaging
  • Part identification label
  • Traceability documentation when supplied
  • Protective foam or ESD-safe packaging if electronic elements are included

3. Product Introduction

Applied Materials spare parts installed inside semiconductor process tools require strict identity control. The 0190-87725 should be matched by exact part number, revision, and equipment compatibility before replacement. A visually similar substitute may fit mechanically while failing process requirements (which is a common source of unexpected tool recovery delays).

This component should be treated as a controlled manufacturing asset rather than a general industrial spare. Verify the mating hardware, chamber location, and maintenance procedure before installation. Inspect surfaces, fastener points, connectors, and any sealing interfaces for contamination or handling damage before returning the tool to production. Applied Materials provides semiconductor manufacturing equipment and related service support for wafer fabrication environments.

4. Core Technical Specifications

Parameter	Value
Manufacturer	Applied Materials (AMAT)
Part Number	0190-87725
Product Category	Semiconductor equipment spare component
Application	Applied Materials wafer fabrication equipment
Function	Tool-specific mechanical/process replacement component
Active Electronics	Revision dependent
Firmware	Not typically applicable
Memory	Not typically applicable
Power Requirement	Tool dependent
Heat Dissipation	Passive or equipment-dependent
Installation Method	Internal equipment assembly mounting
Environment	Semiconductor clean manufacturing environment
Cleanliness Requirement	Controlled handling required
Material	Revision dependent
Documentation	Part traceability records recommended
Storage Method	Clean sealed packaging

AMAT 0190-87725

5. Global Compliance & Industry Certifications

Expected compliance considerations for the AMAT 0190-87725 include:

• CE Mark — generally associated with the complete Applied Materials tool system rather than an individual passive spare component.
• UL/cUL Listed — typically applies to the equipment assembly and electrical system integration.
• RoHS compliance — may apply depending on manufacturing date and supplier documentation.
• ATEX/IECEx — generally not applicable unless the component is integrated into a certified hazardous-area process configuration.
• Marine approvals such as DNV GL — not normally applicable for semiconductor fabrication equipment parts.

For semiconductor facilities, material traceability is often more important than a standalone certification mark. Incorrect materials, coatings, or surface finishes can introduce contamination risks into controlled process chambers.

Verify specific lot certifications with OEM.

6. Long-Term Storage & Asset Preservation Guide

Keep the AMAT 0190-87725 sealed in its original protective packaging until the planned maintenance activity. Do not expose clean-process components to uncontrolled warehouse conditions.

Maintain storage humidity below 60% RH. Moisture exposure can affect metal surfaces, coatings, seals, and precision interfaces over extended periods.

Store the part on a dedicated spare-parts shelf away from chemicals, lubricants, and vibration sources. Inspect packaging condition, identification labels, mounting surfaces, and any protective covers before installation (small contamination events can create significant fab recovery issues).

Record part number, revision, supplier source, receiving date, and inspection status in the spare asset management system.

7. Physical Installation Prerequisites

• Install only according to the applicable Applied Materials equipment maintenance procedure.
• Confirm exact tool model and hardware revision before replacement.
• Use semiconductor cleanroom handling procedures.
• Wear approved gloves during unpacking and installation.
• Inspect all mating surfaces before assembly.
• Verify mounting alignment and fastener condition.
• Avoid touching precision surfaces directly.
• Confirm chamber cleanliness before equipment restart.
• Maintain proper equipment grounding practices where applicable.
• Follow tool-specific clearance and thermal requirements.

8. Buyer’s FAQ (Logistics & Compliance Focus)

Q: What HS Tariff Code is commonly used for the AMAT 0190-87725?

A: Semiconductor equipment spare parts may be classified under different HS categories depending on the exact function and customs interpretation. Mechanical components, chamber parts, and equipment assemblies may fall under different headings. Confirm the final HS code with the importing customs authority.

Q: Does Country of Origin (COO) affect importing this AMAT spare part?

A: Yes. COO affects customs declarations, duty treatment, supplier qualification records, and semiconductor asset traceability. Ensure the invoice, packing list, and product identification records contain consistent origin information.

Q: Is shipping insurance recommended for this part?

A: Recommended. Semiconductor equipment components can have high operational value even when physically small. Damage, contamination, or lost traceability during transportation may delay tool recovery.

Q: Does the AMAT 0190-87725 include firmware pre-loaded?

A: Not typically. This type of Applied Materials spare part is generally a hardware component rather than a programmable controller. If the supplied revision contains electronic elements, verify any firmware or configuration requirements against the equipment maintenance documentation before installation.