1. Honeywell FS-SICC-0001/L5 | Genuine Control System Spare

2. Unboxing & Physical Snapshot

• Brand & Model: Honeywell FS-SICC-0001/L5
• Product Category: System Interconnection Cable / FTA Interconnection Cable
• Application: Honeywell control system interconnection cable used for linking field termination assemblies (FTAs) with compatible control system hardware. This cable assembly is identified as a 5-meter system interconnection cable configuration.
• Approximate Physical Dimensions:
  • Cable length: approximately 5 m (16.4 ft)
  • Cable diameter: approximately 3-8 mm depending on jacket and connector configuration
  • Coiled shipping length varies with packaging method
• Estimated Shipping Weight: Approximately 0.3-3 kg depending on packaging configuration and included protection materials.
• What’s in the Box:
  • Honeywell FS-SICC-0001/L5 interconnection cable assembly
  • Factory-installed connectors / termination hardware
  • Identification label
  • Protective cable packaging
  • Documentation when supplied with OEM shipment

3. Product Introduction

Control system cabinets depend on reliable signal paths between I/O hardware and field termination assemblies. The Honeywell FS-SICC-0001/L5 provides the physical interconnection between compatible Honeywell automation components, supporting organized cabinet wiring and dependable signal transfer in industrial environments.

This cable assembly is a passive hardware component, but it remains part of the control system signal chain. Cable routing, connector seating, shielding, and mechanical protection directly affect long-term reliability. Inspect the connector shells, strain relief points, and cable jacket before installation (shipping damage is often visible at these mechanical interfaces first).

4. Core Technical Specifications

Parameter	Value
Manufacturer	Honeywell
Model Number	FS-SICC-0001/L5
Product Type	System Interconnection Cable
Cable Length	5 meters
Application	FTA / control system interconnection
Cable Construction	Shielded multi-conductor cable assembly
Conductor Material	Copper conductor
Shielding	Foil or shielded construction depending on variant
Connector Type	Honeywell proprietary termination/interface connectors
Operating Temperature	Approximately -40°C to +85°C (configuration dependent)
Installation Environment	Industrial control cabinets
Power Consumption	Passive component; no active power requirement
Heat Dissipation	Not applicable
Mounting Method	Cabinet cable routing between system assemblies
Weight	Approximately 0.3 kg typical; packaging dependent

Honeywell FS-SICC-0001/L5

5. Global Compliance & Industry Certifications

Expected regulatory considerations for this class of industrial cable assembly may include:

• CE Mark for applicable EMC requirements when supplied as part of a certified Honeywell control system.
• UL/cUL recognition where required by the complete industrial control panel installation.
• ATEX/IECEx consideration when used within hazardous-area automation systems requiring approved signal infrastructure.
• Marine approvals such as DNV GL when installed in certified offshore or vessel automation applications.

Cable certification alone does not define hazardous-area compliance. The complete installation—including barriers, field devices, cabinets, and associated control hardware—must meet the approved protection concept.

Verify specific lot certifications with OEM.

6. Long-Term Storage & Asset Preservation Guide

• Keep the FS-SICC-0001/L5 sealed in its original packaging until installation. Protect connector ends from dust, moisture, and mechanical impact.
• Maintain warehouse humidity below 60% RH to prevent oxidation on connector contacts and degradation of cable materials.
• Store the cable in a relaxed coil without sharp bends or compression. Excessive bending can damage internal conductors or shielding layers (the failure may only appear during commissioning).

7. Physical Installation Prerequisites

• Confirm cable length and connector type match the installed Honeywell system architecture before installation.
• Route the cable away from high-voltage power wiring, motor feeders, and variable-frequency drive cables.
• Maintain proper cabinet grounding and shield termination practices.
• Avoid sharp cable bends and maintain the manufacturer-recommended bend radius.
• Provide adequate cabinet clearance for connector access and future maintenance.
• Secure cable routing using approved supports to prevent connector strain.

8. Buyer’s FAQ (Logistics & Compliance Focus)

Q: What HS Tariff Code is commonly reviewed for the Honeywell FS-SICC-0001/L5?
A: Interconnection cable assemblies are commonly reviewed under electrical conductor and cable assembly classifications, often within HS 8544 categories. Final classification depends on cable construction, connector configuration, and destination-country customs rules.

Q: Does Country of Origin (COO) documentation matter for this Honeywell cable assembly?
A: Yes. COO records support customs clearance, supplier qualification, and maintenance traceability. Retain OEM labels, packaging records, and receiving inspection documents.

Q: Should shipping insurance be purchased for the FS-SICC-0001/L5?
A: Yes. Cable assemblies can suffer hidden connector damage, crushed jackets, or internal conductor issues during transportation. Use protective packaging and shipment coverage based on replacement value.

Q: Does the FS-SICC-0001/L5 include the latest firmware pre-loaded?
A: No. This is a passive interconnection cable and contains no firmware. System compatibility depends on the connected Honeywell controllers, I/O assemblies, and installed configuration.