1. AMAT 0190-30287 | Original Fab Tool Computer Module

2. Unboxing & Physical Snapshot

• Brand & Model: AMAT 0190-30287
• Manufacturer: Applied Materials (AMAT). Applied Materials designs and services semiconductor manufacturing equipment used in wafer fabrication facilities worldwide.
• Product Type: OEM Single Board Computer (SBC) / CPU Card for Applied Materials semiconductor processing equipment. Public references identify this part as a VME-based industrial computer board with Pentium III processor architecture.
• Primary Application: Semiconductor fabrication equipment control systems, wafer processing tools, equipment controller racks, and legacy AMAT platforms.
• Physical Dimensions (Approximate W × H × D):
  • Approximately 160 × 233 × 20 mm
  • Standard VME single-board computer form factor.
• Estimated Shipping Weight: Approximately 0.8–1.2 kg including ESD packaging and export carton.
• What’s in the Box:
  • AMAT 0190-30287 SBC / CPU board
  • VME edge connector interface
  • Processor assembly
  • Memory modules (installed configuration dependent)
  • Board identification label
  • Anti-static (ESD) shielding bag
  • Protective transport packaging

3. Product Introduction

Structure B — Architecture Hook

The AMAT 0190-30287 operates as a computer processing node inside Applied Materials semiconductor equipment control architecture. Installed within a VME-based equipment controller chassis, the board provides the computing resources required for tool communication, equipment sequencing, and machine-level control functions.

Legacy semiconductor tools depend heavily on exact controller hardware compatibility. A replacement CPU card must match processor type, memory configuration, firmware image, and VME backplane requirements (—which is critical when restoring production equipment during a scheduled fab maintenance window). Inspect the edge connector, memory devices, and board revision label before installation.

4. Core Technical Specifications

Parameter	Value
Manufacturer	Applied Materials
Part Number	0190-30287
Product Type	VME Single Board Computer
Application	Semiconductor equipment controller
Processor	Intel Pentium III 400 MHz (reported configuration)
Memory	128 MB RAM (reported configuration)
Bus Architecture	VMEbus
Board Format	Single-board computer card
Operating System	Tool-specific industrial software environment
Storage Interface	Equipment-dependent storage media
Power Input	VME chassis backplane supply
Power Consumption	Application dependent
Heat Dissipation	Passive board-level heat dissipation
Firmware Storage	Tool configuration dependent
Mounting Method	VME rack slot insertion
Operating Environment	Semiconductor equipment cabinet
Operating Temperature	Typically controlled equipment environment
Storage Temperature	Controlled warehouse conditions
Weight	Approximately 0.8–1.2 kg

AMAT 0190-30287

The 0190-30287 is a computing hardware assembly rather than a passive interface board. Configuration data, operating software, and compatibility records should be verified before installation.

5. ? Global Compliance & Industry Certifications

Expected compliance considerations for the AMAT 0190-30287 include:

• CE Mark — may apply when installed as part of a compliant Applied Materials equipment system.
• UL/cUL Recognition — may apply depending on the complete semiconductor tool electrical certification.
• SEMI Equipment Safety Compatibility — semiconductor manufacturing equipment commonly follows SEMI safety practices.
• RoHS Compliance — may apply depending on manufacturing date and regional requirements.
• ATEX/IECEx — generally not applicable unless installed within a specifically certified hazardous-area system.
• Marine Approvals (DNV GL) — generally not applicable for semiconductor fabrication equipment.

For semiconductor equipment controllers, compliance also depends on configuration control. The correct hardware revision, software image, and maintenance history are often required during fab audits.

Verify specific lot certifications with OEM.

6. ? Long-Term Storage & Asset Preservation Guide

Keep the AMAT 0190-30287 inside the original anti-static (ESD) shielding bag during storage. The VME edge connector and memory devices are vulnerable to contamination and electrostatic damage.

Maintain warehouse humidity below 60% RH. Moisture can accelerate oxidation on connector fingers and affect long-stored electronic assemblies.

Before installation:

• Inspect the gold-plated edge connector for oxidation or contamination.
• Verify processor, memory modules, and board labels match the maintenance record.
• Check electrolytic capacitors for swelling or leakage.
• Confirm the stored software image is available before removing the existing controller.

Do not touch exposed PCB traces or connector contacts with bare hands.

7. Physical Installation Prerequisites

• Install only into the approved AMAT VME controller chassis.
• Confirm the correct rack slot assignment before insertion.
• Use ESD protection during handling.
• Inspect the VME backplane connector alignment.
• Verify chassis power supply compatibility.
• Ensure cabinet airflow supports passive cooling around the board.
• Leave at least 50 mm clearance around ventilation paths where cabinet design permits.
• Confirm grounding continuity between chassis and equipment frame.

Avoid forcing the board into the rack. Misalignment can damage the edge connector and backplane contacts.

8. Buyer’s FAQ (Logistics & Compliance Focus)

Q1. What HS Tariff Code is commonly used for AMAT 0190-30287?

A: The final Harmonized System classification depends on the actual function of the board and customs interpretation in the destination country. A VME industrial computer board may be reviewed under electronic control equipment or data processing equipment categories. Confirm the final HS code with your customs broker.

Q2. Does Country of Origin affect AMAT 0190-30287 import documentation?

A: Yes. COO information supports customs clearance, equipment traceability, and customer audit records. Keep the original board label, commercial invoice, packing list, and receiving inspection documents together.

Q3. Is shipping insurance recommended for this CPU board?

A: Recommended. The board contains processor electronics, memory components, and precision VME connectors. Shock, moisture, or ESD exposure during transportation can create hidden failures.

Q4. Does the AMAT 0190-30287 include the latest firmware pre-loaded?

A: Firmware availability depends on the board condition and previous equipment configuration. This SBC may contain tool-specific software or storage media depending on the installed system. Verify software revision, hardware revision, and AMAT tool compatibility before commissioning.