Description
- ICS Triplex T9310-02 | Original Control Rack Interconnect
2. Unboxing & Physical Snapshot
- Model & Brand: ICS Triplex T9310-02 Backplane Expansion Cable Assembly. This assembly extends the Trusted/AADvance I/O architecture by connecting T9300 I/O base units or processor base units through the system expansion bus.
- Physical Dimensions (Approximate W × H × D): Cable assembly format; approximately 2000 mm cable length with connector adapters at both ends.
- Estimated Shipping Weight: Approximately 0.15–0.45 kg (0.3–1.0 lb) depending on protective packaging and connector protection method.
- Cable Length: 2 meters (6.56 ft).
- What’s in the Box:
- ICS Triplex T9310-02 expansion cable assembly
- Cable plug and socket assemblies
- Connector adapters
- Locking hardware / retaining screws
- Protective packaging
- ESD-safe handling materials where required
- Documentation when supplied
3. Product Introduction
The T9310-02 is installed as a physical extension link within the Trusted controller cabinet architecture. It connects separate T9300 I/O base units or extends the connection between processor and I/O assemblies while carrying command bus, response bus, and system power signals. Verify the cable routing path before installation. The locking connectors, retaining screws, and screened cable jacket must remain correctly positioned (which is critical in safety controller cabinets exposed to vibration).
This is a passive interconnection assembly, not an intelligent module. No firmware, processor, or configurable memory exists inside the cable assembly. Its function is maintaining the electrical continuity of the Trusted system backplane over extended cabinet layouts. Inspect connector pins, strain relief sections, shielding, and cable jacket condition before installation, especially when using long-stored spare inventory.
4. Core Technical Specifications
| Parameter | Value |
|---|---|
| Manufacturer | ICS Triplex / Rockwell Automation |
| Model Number | T9310-02 |
| Product Type | Backplane Expansion Cable Assembly |
| Application | Trusted TMR I/O Base Expansion |
| Cable Length | 2 m |
| Compatible Hardware | T9300 I/O Base Units and Trusted processor base connections |
| Signal Carried | Command bus, response bus, system power |
| Power Supply Supported | Redundant 24 VDC nominal (18–32 VDC system range) |
| Connector Type | Multi-way plug and socket assemblies |
| Shielding | Screened cable construction |
| Mounting Method | Cabinet internal cable connection |
| Data Function | Backplane communication extension |
| Firmware | None |
| Memory | None |
| Operating Temperature | Approximately -20°C to +60°C class |
| Storage Temperature | Typical industrial electronic storage range |
| Weight | Approximately 0.15–0.45 kg |

ICS Triplex T9310-02
5. Global Compliance & Industry Certifications
Expected regulatory considerations for the ICS Triplex T9310-02 include:
- CE Mark compliance when installed within an approved Trusted system configuration
- IEC 61508 SIL system compatibility when used as part of the validated safety architecture
- UL/cUL Listed status where applicable to the complete control system assembly
- ATEX/IECEx suitability only when installed within an approved hazardous-area system
- Marine approvals such as DNV GL only when included in a certified marine control package
For safety systems, the cable itself does not determine SIL capability, but incorrect replacement cables can interrupt validated communication paths. A properly specified assembly maintains the designed separation, shielding, and signal integrity requirements.
Verify specific lot certifications with OEM.
6. Long-Term Storage & Asset Preservation Guide
Keep the T9310-02 inside its original packaging during storage. Protect connector ends with caps or sealed wrapping to prevent dust accumulation on the contact surfaces.
Maintain warehouse humidity below 60% RH. Cable assemblies are less sensitive than powered modules, but moisture and chemical exposure can still degrade connector plating and cable insulation over long periods.
Inspect the complete cable before installation. Check the connector shells, locking hardware, strain relief points, and jacket surface (small cuts or compression marks should be treated as potential reliability concerns).
Avoid tight bends during storage. Maintain a reasonable coil diameter to prevent permanent stress on internal conductors and shielding layers.
7. Physical Installation Prerequisites
- Install only within compatible ICS Triplex Trusted system cabinet layouts.
- Confirm the correct expansion connection points before installation.
- Ensure both connectors are fully seated and locking hardware is secured.
- Maintain separation from high-voltage power cables to reduce electromagnetic interference.
- Avoid sharp cable bends near connector exits.
- Verify cabinet grounding and shield termination practices.
- Maintain sufficient cabinet clearance for airflow around connected I/O assemblies.
- Leave at least 50 mm clearance above and below rack ventilation areas where practical.
8. Buyer’s FAQ (Logistics & Compliance Focus)
Q: What HS Tariff Code is commonly used for the ICS Triplex T9310-02?
A: Cable assemblies used within industrial control systems are commonly evaluated under HS 8544 categories for insulated electrical conductors, while complete control assemblies may fall under other classifications. Confirm the final HS code with the importing customs authority.
Q: Does Country of Origin affect importing the T9310-02?
A: Yes. COO affects customs documentation, duty calculations, and asset traceability. Verify the origin listed on the commercial invoice, packing list, and product identification records.
Q: Is shipping insurance required for this expansion cable?
A: Recommended for international shipments. Although passive, connector damage or cable deformation may prevent installation and can delay restoration activities in safety system cabinets.
Q: Does the T9310-02 include firmware pre-loaded?
A: No. The T9310-02 is a passive backplane expansion cable assembly and contains no firmware, processor, or memory components. Configuration data remains within the connected Trusted controller modules.



Start Chat