Description
ABB PPD115A02 3BHE017628R0002 FOCS Module
| Attribute | Rating |
|---|---|
| Product type | FOCS (fibre optic communication system) module, plug-in card for ABB power-electronics and excitation cabinets |
| Model designation | PP D115 A02, configuration tag FOCS-300-L70 |
| ABB order code | 3BHE017628R0002 |
| Function | High-speed, noise-immune data link between the cabinet controller and the power stage using optical fibre instead of copper signal cables |
| Configuration tag | The FOCS-300-L70 suffix identifies the channel count and fibre variant of the assembly; it is part of the ordering identity, not a separate product |
| Channels | Multi-channel optical transmit and receive pairs on the front connectors, one fibre per signal path |
| Data direction | Command and firing signals out to the power section, status and measurement feedback back to the controller |
| Insulation benefit | Full galvanic separation between control electronics and the high-voltage side, removing common-mode interference paths |
| Supply | Cabinet-internal low-voltage DC rail through the backplane |
| Environmental | Conformally coated PCB, cabinet-mounted, IP20 in service |
| Host systems | ABB drive and excitation cabinets of the ACS / UNITROL generations, also listed under 800xA and Advant OCS spare catalogues |
| Weight / packing | Card assembly, sub-kilogram; fibre pigtails and connectors add bulk to the packed unit |
| Compatibility | Fibre type, connector style and channel mapping differ between FOCS variants — mating a module with the wrong fibre set gives link errors or no communication at all |
| Handling | Fibres disconnected only with the optical source off, connector end faces cleaned before re-mating, module slot and channel numbering recorded before removal |

ABB IGCT Module | ABB ACS6000 | ABB PCS6000 | PPD

ABB IGCT Module | ABB ACS6000 | ABB PCS6000 | PPD

ABB IGCT Module | ABB ACS6000 | ABB PCS6000 | PPD


