Description
ABB PM858 3BSE093350R1 AC 800M Processor Unit
| Attribute | Rating |
|---|---|
| Product type | AC 800M processor unit, rail-mounted CPU module for System 800xA process automation |
| Type designation | PM858 |
| ABB order code | 3BSE093350R1 |
| Processor | Motorola MPC866, 33 MHz clock frequency |
| Memory | 16 MB RAM; 7.147 MB available for the application |
| Program storage | Flash memory for application and data, plus removable flash card slot for backup and transport |
| Redundancy | CPU redundancy supported, switchover time max 10 ms, paired over the RCU-Link cable |
| Supply | 24 V DC, 19.2–30 V DC, max 5 % ripple to IEC 61131-2, detachable 4-pole terminal block |
| Current / dissipation | Around 210 mA typical and 360 mA maximum at 24 V, roughly 5.1 W dissipated |
| Power reservoir | Internal 5 ms reservoir, enough for a controlled shutdown on supply loss |
| Backup battery | Built-in lithium 3.6 V, 0.95 Ah, 1/2 AA, 0.3 g lithium content |
| Real-time clock | 100 ppm stability, about 1 hour drift per year |
| Communication | Two onboard Ethernet ports (RNRP redundancy) plus two RS-232 service ports and the CEX bus connector |
| High integrity | No — PM858 is the standard PA controller; the SIL3 HI path is PM857 / PM863 / PM867 |
| Compatibility | Fits the TP830 / TP850 baseplate family; the redundant pair must be matched and the firmware level aligned with the project |
| Handling | Module hot-swap permitted on the rail, battery and flash card state checked, RCU-Link and CEX addresses verified, project downloaded and redundancy test performed |

ABB Processor Module | PM

ABB Processor Module | PM

ABB Processor Module | PM




