Description

1. ICS Triplex TC-801-02-4M5 | Trusted TMR Speed Interface

Unboxing & Physical Snapshot

• Model & Brand: ICS Triplex TC-801-02-4M5 Trusted I/O Companion Slot Cable. This cable assembly connects Trusted speed monitoring hardware, typically linking a T8442 Speed Monitor module with associated Speed Field Termination Assemblies (FTAs).
• Approximate Physical Dimensions (W × H × D): Cable assembly format; approximate packed dimensions 42 × 40 × 15 cm for transport packaging.
• Estimated Shipping Weight: Approximately 2.0–2.5 kg (4.4–5.5 lb) depending on packaging configuration. The longer TC-801 cable variants are documented around this weight range.
• Cable Length: 4.5 meters (4M5 suffix designation).
• What’s in the Box:
  • ICS Triplex TC-801-02-4M5 cable assembly
  • LSZH insulated cable jacket
  • Chassis-side connector assembly
  • FTA-side termination connectors
  • Protective wrapping
  • Anti-static packaging where applicable
  • Documentation when supplied

Product Introduction

The TC-801-02-4M5 is installed as part of the Trusted TMR speed monitoring signal path, providing the physical connection between the controller-side interface and remote termination hardware. Route the cable according to cabinet segregation rules. Avoid sharp bends, excessive pulling force, or contact with high-temperature surfaces (which can affect long-term insulation performance).

This cable is a passive interconnection component, but its role is significant in safety-related applications. It carries speed measurement signals between Trusted modules and FTAs used in turbine overspeed protection and similar rotating equipment monitoring systems. Inspect the connector hoods, cable sheath, strain relief points, and identification labels before installation.

Core Technical Specifications

ICS Triplex TC-801-02-4M5

Global Compliance & Industry Certifications

Expected compliance considerations for the ICS Triplex TC-801-02-4M5 include:

• CE Mark compatibility when installed within an approved Trusted system configuration
• IEC 60332-3 Category A flame performance for the cable construction
• UL/cUL recognition where applicable to specific cable variants and system approvals
• ATEX/IECEx suitability only when installed within a certified hazardous-area system
• Marine approvals such as DNV GL only when included in an approved marine package

The LSZH cable construction is important in enclosed control rooms because it reduces smoke and corrosive gas emissions during fire conditions, helping protect personnel and sensitive electronics.

Verify specific lot certifications with OEM.

Long-Term Storage & Asset Preservation Guide

Keep the TC-801-02-4M5 in its original protective packaging. Do not coil the cable tighter than the manufacturer-recommended bend radius. Permanent deformation can stress internal conductors and shielding layers.

Store in a dry warehouse environment below 60% RH. Moisture exposure can affect connector contacts and cable jacket condition over extended periods.

Before installation, inspect the complete cable length. Check the connector shells, hood locking mechanisms, strain relief sections, and identification tags (small physical defects are often discovered before commissioning when inspection is performed correctly).

Physical Installation Prerequisites

• Install only within the approved ICS Triplex Trusted architecture.
• Verify compatibility with the intended T8442 Speed Monitor and associated FTAs.
• Maintain cable separation from high-voltage power conductors.
• Avoid sharp bends and mechanical stress at connector exits.
• Ensure connector hoods are fully secured.
• Bond cable shielding according to the cabinet grounding design.
• Maintain adequate cabinet routing space for cooling airflow.
• Leave at least 50 mm clearance above and below rack ventilation paths where practical.

Buyer’s FAQ (Logistics & Compliance Focus)

Q: What HS Tariff Code is commonly used for the TC-801-02-4M5?

A: Industrial control cable assemblies are often evaluated under HS 8537-related classifications when supplied as part of a control system assembly. The final classification depends on customs interpretation and the declared function of the cable.

Q: Does Country of Origin affect importing this cable assembly?

A: Yes. COO affects customs documentation, duty assessment, and equipment traceability. Confirm the origin shown on supplier paperwork and packaging labels before shipment.

Q: Is shipping insurance necessary for a cable assembly?

A: Recommended. Although passive, the cable contains precision connectors and specialized termination hardware. Damage to connector pins or cable shielding can prevent immediate installation.

Q: Does the TC-801-02-4M5 include firmware pre-loaded?

A: No. This is a passive cable assembly and contains no firmware or memory devices. Firmware functions are located in the connected Trusted controller and I/O modules.