Description
- Brand: FOXBORO
- Full Model Number: 14A-FR
- Product Family: 14A Series Pneumatic Flow Integrators
- Core Function: Receives a pneumatic flow signal, extracts the square-root relationship, and accumulates total flow on an integral mechanical counter
- Instrument Type: Field-mounted pneumatic flow integrator with supply regulator
- Top 3 Technical Specifications:
- Input Signal: 20–100 kPa (3–15 psi)
- Supply Pressure: 140 kPa (20 psi)
- Counter: Six-digit nonreset totalizer
- Accuracy: ±0.5% of full scale when calibrated between 30% and 100% of flow
- Repeatability: 0.2% of full scale
- Input Thresholds: Approximately 7% flow cutoff and 11% flow startup
- Count Rate: 4.75–49.21 counts/minute, with additional hourly and daily count-rate ranges
- Housing: Cast aluminum body with acrylic enamel finish; gasketed, weatherproof, glass-filled polycarbonate cover
- Lifecycle Status: Legacy instrument; current production and support status require confirmation
- Stock and Condition: Physical availability, instrument condition, regulator inclusion, and calibration status subject to confirmation
- Dispatch Lead Time: Confirmed after inventory inspection and order approval
- Warranty: Written coverage and return conditions required before purchase order approval
Commercial-Technical Deep Dive
When a legacy pneumatic flow-measurement installation loses its totalizer, replacing the instrument with a generic electronic counter may require changes to the signal chain, instrument mounting, and maintenance procedures. The FOXBORO 14A-FR is a field-mounted pneumatic flow integrator with a supply regulator. It accepts a 3–15 psi pneumatic input, processes the flow signal, and accumulates the measured total on a six-digit mechanical counter. The instrument is intended for applications where flow totalization remains part of an established pneumatic control or measurement system. Its original count rate, integration factor, and input calibration should be confirmed before procurement.
For an existing installation, a verified 14A-FR replacement may cost less than converting the measurement loop to an electronic totalizer. The comparison should include instrument price, pneumatic tubing and fittings, installation labor, calibration, and commissioning. With specified accuracy of ±0.5% of full scale over the 30–100% flow calibration range, the instrument can support established flow-totalization duties when correctly configured. Repeatability is specified at 0.2% of full scale. These figures should not be interpreted as guaranteed system-level measurement accuracy; upstream transmitter performance and installation conditions also affect the result. For lifecycle planning, assess the cost of retaining pneumatic instrumentation against the engineering, wiring, signal conversion, and validation required for a future electronic replacement.
Compatibility and Installation Traps
Migration and Compatibility
The FOXBORO 14A-FR is a pneumatic instrument, not an electronic DCS input module. Replacement selection depends on the pneumatic signal, totalization requirements, mounting arrangement, and supply regulator configuration.
| Replacement Scenario | Compatibility Assessment | Required Action |
|---|---|---|
| Existing 14A-FR replaced with an equivalent 14A-FR configuration | Candidate like-for-like replacement | Confirm input signal, regulator arrangement, count rate, integration factor, and mounting |
| 14A-FR replaced with a field-mounted 14A-F without the specified regulator arrangement | Not automatically equivalent | Verify the supply-pressure arrangement and installation requirements |
| Replacement instrument with a different input pressure range | Compatibility not established | Confirm signal range and calibration requirements |
| Replacement with an electronic flow totalizer | System conversion may be required | Assess signal conversion, power, wiring, configuration, and totalization logic |
| Replacement with a different count rate or integration factor | Reconfiguration required | Match the required engineering-unit scaling and maximum-flow count rate |

FOXBORO 14A-FR
Quality Assurance SOP
The 14A-FR requires pneumatic bench testing rather than the electronic diagnostics used for PLC and DCS modules. Acceptance should be based on documented pressure response, counting behavior, calibration, and physical condition.
| QA Stage | Required Procedure | Acceptance Criteria |
|---|---|---|
| Part identification | Verify the FOXBORO 14A-FR designation, nameplate, and available serial or traceability information | Identification matches the purchase specification |
| OEM anti-counterfeit visual inspection | Inspect labels, housing markings, fasteners, and evidence of unauthorized repair | No unexplained identification discrepancies |
| Mechanical inspection | Examine the cast aluminum body, cover, seals, mounting points, and pneumatic fittings | No visible damage, corrosion, or compromised seals affecting operation |
| Regulator inspection | Check the supplied regulator arrangement and pressure connections | Configuration matches the purchase specification |
| Pneumatic leak test | Apply controlled supply pressure and check instrument connections and fittings for leakage | No unacceptable leakage under the applicable test procedure |
| Supply-pressure verification | Apply the specified 140 kPa (20 psi) supply using a calibrated pressure source | Supply pressure remains within the applicable test limits |
| Input-signal sweep | Apply the documented 20–100 kPa (3–15 psi) input range | Instrument responds consistently across the specified operating range |
| Cutoff and startup verification | Check low-flow response against the approximate 7% cutoff and 11% startup specifications | Observed behavior is recorded and evaluated against the applicable tolerances |
| Accuracy test | Verify the instrument at representative calibration points between 30% and 100% of full-scale flow | Results meet the applicable ±0.5% full-scale accuracy specification |
| Repeatability test | Repeat measurements at selected points under stable conditions | Results evaluated against the 0.2% full-scale repeatability specification |
| Counter and scaling test | Verify six-digit counter operation and the selected count rate and integration factor | Accumulated counts correspond to the documented configuration |
| Final inspection and packing | Photograph the actual instrument, record test results, and protect pneumatic connections during packing | Shipped unit matches the inspection record and agreed condition |
CRO-Driven Buyer FAQ
Is the FOXBORO 14A-FR still manufactured, and can its availability be confirmed?
The 14A-FR belongs to a legacy pneumatic instrument family. Current production and support status should be confirmed before procurement. Request written stock confirmation, actual-unit photographs, condition classification, regulator inclusion, and the expected dispatch date. Emergency shipping depends on physical availability, inspection, packing, and carrier arrangements.
How do you verify the authenticity and condition of a surplus 14A-FR?
Request photographs of the actual nameplate, counter, housing, pressure connections, and regulator arrangement. The quotation should identify whether the instrument is new original, new surplus, or used, as applicable. Ask for available traceability records and a unit-specific inspection report. If calibration is claimed, request the corresponding test results rather than relying on visual inspection alone.
Does installation require the system to be powered down?
The 14A-FR is pneumatic, so the principal isolation concern is pressure rather than electrical hot swapping. Isolate the relevant pneumatic supply and input signal, depressurize the connections, and verify zero pressure before disconnecting tubing. Follow site isolation procedures and the applicable instrument instructions. If the instrument is installed on a live process measurement loop, obtain the required operating authorization before interruption.
What warranty and technical support terms apply?
The written quotation should state the warranty duration, coverage, defective-on-arrival procedure, return authorization requirements, and exclusions. For used or surplus instruments, confirm whether coverage includes functional performance or only specified defects. Establish whether technical support includes model identification, pneumatic setup guidance, calibration assistance, or field commissioning; these services should not be assumed to be included.
What information is needed to approve a replacement purchase?
Provide the complete model number, current mounting arrangement, pneumatic input and supply pressures, maximum-flow count rate, integration factor, and required engineering units. Include photographs of the installed instrument and its connections when available. These details help establish whether the proposed 14A-FR matches the existing measurement duty before the purchase order is released.


