TRICONEX AT-2701FX | 843-000844-00 REVD Fiber Ethernet Card

$2,780.00

The TRICONEX AT-2701FX  designation is associated with a 100BASE-FX fiber Ethernet interface in supplier listings.
Brand model:TRICONEX 
Product Name:AT-2701FX 843-000844-00 REVD
Warranty: 1 year
Origin:USA
HS code:85389000.00
Inventory: Spot/Futures
Goods condition: Brand new
Delivery time: 3-4days/1month

Brand: Model/SKU: TRICONEX AT-2701FX

Description

  • Brand: TRICONEX, as identified in the supplied part reference
  • Model: AT-2701FX

  • Part Number: 843-000844-00

  • Revision: D

  • Product Type: Fiber-optic Ethernet network interface card

  • Lifecycle Status: Exact assembly lifecycle and OEM availability require confirmation

  • Core Function: 100BASE-FX fiber Ethernet connectivity; the specific role of this revision in the installed Triconex environment requires verification

  • Top 3 Technical Specs: 100 Mbps Ethernet; 32-bit PCI 2.2 interface; approximately 2 W power consumption at 3.3 V for the documented AT-2701FX adapter

  • Fiber Interface: Connector variant must be confirmed; documented AT-2701FX variants include SC, ST, and MT-RJ

  • Typical Transmission Distance: Up to 2 km in full-duplex operation under specified conditions for the documented adapter

  • Operating Temperature: 0°C to 50°C for the documented Allied Telesis AT-2701FX adapter; applicability to the supplied assembly requires verification

  • Stock & Condition: Actual quantity, physical condition, revision, test results, and dispatch date require confirmation

Identification note: AT-2701FX is also the model designation of a conventional Allied Telesis PCI fiber Ethernet adapter. The precise relationship between that adapter and the supplied Triconex reference 843-000844-00 REVD must be confirmed against the actual board label and approved parts documentation. Do not assume that generic AT-2701FX specifications establish compatibility with a Triconex controller chassis or safety-system application.

 

Obsolescence & Supply Chain Deep Dive

When a legacy fiber-network interface fails, restoring communications may depend on identifying the correct adapter, connector type, revision, and host hardware. The TRICONEX AT-2701FX 843-000844-00 REVD designation is associated with a 100BASE-FX fiber Ethernet interface in supplier listings. Before ordering, establish whether the installed component is a PCI network adapter in an engineering workstation or another system-specific assembly. This distinction determines the required replacement, driver support, and installation procedure. A model-number match alone is insufficient, particularly when the equipment is associated with a safety instrumented system.

Replacing a confirmed faulty interface card may be less expensive than replacing an entire engineering workstation or redesigning an existing network connection. The total cost of ownership (TCO) assessment should include the replacement price, installation labor, driver or operating-system compatibility checks, fiber-link testing, and any communications downtime. For preliminary budgeting, allow approximately 1–2 maintenance labor hours for a straightforward card replacement and basic network verification, excluding system troubleshooting and application requalification. This is a planning estimate, not a guaranteed installation time. Where the existing host computer or software environment is no longer supported, compare the cost of retaining the legacy hardware with a planned workstation or network migration.

 

Compatibility & Replacement Matrix

Replacement Scenario

Classification

Required Action

Preliminary Time Allowance

Exact 843-000844-00 REVD assembly with confirmed matching hardware

Conditional drop-in replacement

Verify board identity, connector type, host interface, software environment, and approved installation location.

1–2 maintenance labor hours

Different AT-2701FX revision

Compatibility requires verification

Compare hardware identification, connector configuration, interface requirements, and applicable driver support.

1–2 engineering hours for initial review

Different fiber Ethernet adapter

Software compatible only if the host and driver support it

Verify PCI requirements, optical interface, link configuration, driver compatibility, and network settings.

Estimate after host-system review

Proposed installation in a Triconex controller chassis

Not presumed compatible

Obtain the approved hardware documentation and confirm that the assembly is designed for that specific chassis and application.

Engineering assessment required

Replacement requiring connector, cabling, or workstation changes

Hardware or configuration modification may be required

Review network topology, fiber type, connector arrangement, operating system, and communications settings.

Site-specific estimate required

Cost planning: Calculate the installed replacement cost from the quoted hardware price, maintenance labor, any driver or configuration work, and network restoration testing. If the host platform is obsolete, include the cost of maintaining a compatible operating environment. Any system-specific engineering or safety assessment should be estimated separately.

Field Traps to Check Before Ordering

  • Part-number and revision mismatch: Confirm that the actual label reads 843-000844-00 REVD. Obtain photographs of the complete board and its identifying marks before accepting an alternative.

  • Fiber connector mismatch: Check whether the installed interface uses SC, ST, or MT-RJ connectors. Confirm the connector arrangement on both ends of the link.

  • Optical interface mismatch: Verify that the installed fiber type and the replacement’s optical characteristics are compatible. The documented AT-2701FX adapter uses 100BASE-FX; do not substitute a different Ethernet optical standard without reviewing both endpoints.

  • PCI and driver compatibility: The documented adapter uses a 32-bit PCI 2.2 interface. Check physical slot requirements, host voltage signaling, operating-system support, and driver availability before installation.

  • Safety-system assumptions: Do not interpret an Ethernet interface’s use within an industrial environment as proof that the card itself is safety-certified. Confirm the approved application and system architecture before connecting it to safety-related equipment.

TRICONEX AT-2701FX

TRICONEX AT-2701FX

 

Quality Assurance & Testing SOP

The following procedure defines a proposed inspection and acceptance scope for the AT-2701FX 843-000844-00 REVD. Testing must correspond to the actual hardware supplied and the approved application. Generic network-card tests do not establish suitability for a Triconex safety-system installation.

Visual Inspection and Traceability

  • Part-number verification: Match the model, full part number, and revision against the purchase specification.

  • Physical examination: Inspect the PCB, edge connector, optical ports, components, and mounting bracket for corrosion, contamination, bent contacts, or unauthorized rework.

  • Authenticity screening: Examine manufacturer markings, label consistency, board identifiers, and available traceability records.

  • Condition declaration: Record whether the unit is new original, new surplus, or previously used, as applicable.

  • Photographic evidence: Capture the actual board, revision marking, connector type, and overall condition before packaging.

Electrical and Hardware Checks

  • Verify the host interface requirements against the documented card specification.

  • Inspect the edge connector and confirm that no contacts are damaged or contaminated.

  • Where an approved test environment is available, verify that the host recognizes the card correctly.

  • Confirm power behavior against the applicable hardware documentation.

  • Record the test host, interface configuration, observed status, and any hardware errors.

Fiber Link and Network Testing

  • Confirm the optical connector type and fiber compatibility before connecting the card.

  • Inspect and clean optical connectors using suitable fiber-cleaning equipment.

  • Establish a compatible 100BASE-FX link with a known-good peer interface.

  • Verify link establishment, transmit and receive activity, and full-duplex operation where configured.

  • Run a controlled network traffic test and record packet loss, link interruptions, and communication errors.

  • Where required by the application, verify the supported driver, operating system, and approved network configuration.

  • Record the test equipment, link arrangement, duration, and results.

Final Acceptance and Shipment Release

  • Match the tested board’s identification against the sales documentation.

  • Provide actual-unit photographs and the agreed inspection and functional-test records.

  • Identify any tests not performed and any restrictions of the test setup.

  • Package the board using appropriate electrostatic-discharge protection and mechanical protection for the optical ports.

  • Release the unit only after the agreed purchase-order acceptance criteria have been met.

Testing limitation: A successful PCI recognition or Ethernet link test does not establish compatibility with the complete Triconex installation, nor does it establish a safety integrity rating. Application approval and any required system validation must follow the applicable OEM documentation and site procedures.

Procurement & Lifecycle FAQ

Is the TRICONEX AT-2701FX 843-000844-00 REVD in stock, and what is the emergency shipping cutoff?

Physical stock must be confirmed for the exact revision and assembly. Request written confirmation of quantity, condition, identification-label photographs, test status, warehouse location, and earliest dispatch date. Emergency shipping depends on payment clearance, export documentation, packaging, and carrier collection schedules. Same-day dispatch requires explicit confirmation.

How do you verify authenticity and condition for this legacy interface card?

Request photographs of the actual board, its identification markings, revision, and optical connectors. Ask for available traceability records and a written condition declaration. For tested stock, request evidence of host recognition and fiber-link testing. Visual inspection alone does not establish functional performance.

Will the AT-2701FX work with my existing Triconex system?

Compatibility cannot be established from the model designation alone. Confirm whether the card is installed in an engineering workstation, another computer-based interface, or a system-specific assembly. Verify the host hardware, driver requirements, connector type, and approved application documentation before issuing the purchase order.

What warranty and return terms should be confirmed before purchasing?

Confirm the warranty duration, commencement date, defect coverage, exclusions, return authorization procedure, and deadline for reporting a defective-on-arrival unit. Establish who pays return freight and what evidence is required to support a claim. Record all agreed terms in the quotation or purchase order.

Is the AT-2701FX suitable for long-term support of a legacy installation?

That depends on the exact assembly, host platform, driver availability, and network architecture. Assess whether replacement hardware remains obtainable and whether the current operating environment can be maintained securely and reliably. For equipment supporting safety-related operations, confirm the approved replacement path with the responsible controls engineer before changing the communications hardware.

TRICONEX 3625 | Factory-Sealed 24 VDC Module
Triconex 3664 | Safety System DDO & Compliance
Triconex 3700 | Tricon Safety System | Legacy Spare
TRICONEX 3700A | 32-Channel Safety Input Module
Triconex 3721 | 32-Point TMR Analog Input Module
TRICONEX 4329 |  Safety System Module
Triconex 4329G | Factory-Sealed Safety Network Module
Triconex 4409 | Exact Part Identity | Compliance
TRICONEX 8111 | 8-Slot Expansion Chassis
Triconex 8111C | Tricon Chassis Power Module | OEM

 

mingpian
xcd