Description
- Brand: Foxboro
- Full Model Number: CM902WM
- System/Series Family: Foxboro I/A Series Industrial Power Modules; CM900 Series
- Core Function: Converts selectable AC input power into regulated 27.5 VDC output for compatible industrial control-system equipment.
- Top 3 Hardcore Specs:
- Selectable AC Input: 100, 120, 220, or 240 VAC
- DC Output Voltage: 27.5 VDC
- Continuous Output Current: 2.4 A; 3 A rated module class
- Additional Hardware Details: Rear heat sink; two front status LED indicators
- Stock Status: Current availability and condition require confirmation; New Surplus, Factory Sealed, or Used Tested classification must match the actual unit
- Lifecycle Consideration: Legacy product; reported as discontinued by the manufacturer in available market records
Technical Product Introduction
When an industrial control cabinet develops repeated resets or several downstream modules lose power simultaneously, the power supply deserves inspection before individual control cards are replaced. The Foxboro CM902WM is an I/A Series industrial power module designed to provide regulated DC power to compatible control-system equipment. Its documented output is 27.5 VDC at 2.4 A continuous, with selectable 100, 120, 220, or 240 VAC input. For maintenance teams supporting legacy installations, these ratings provide a practical starting point for identifying a replacement and checking the existing cabinet’s power requirements.
The CM902WM belongs to the CM900 power-module family and features a rear heat sink and two front LED indicators. Its value in a legacy maintenance program lies in preserving the existing power architecture when the original model remains appropriate for the installed equipment. Replacing it with an unrelated or newer-generation supply may introduce different mounting, wiring, output, or integration requirements. Before procurement, compare the existing unit’s nameplate, hardware revision, input selector setting, and required DC load with the proposed replacement (the correct input-voltage setting is especially important on equipment configured for multiple AC supply levels). The rated 3 A module classification should not be confused with its documented 2.4 A continuous output.
Application Scenarios & Field Realities
- During a control-cabinet power fault: If multiple modules reset together or several devices lose power at once, measure the supply output and inspect the upstream AC source before condemning individual control modules. The CM902WM’s 27.5 VDC rating provides a reference for checking the specified output, subject to the applicable OEM tolerances.
- In legacy DCS maintenance programs: Where a plant operates an established Foxboro I/A Series installation, retaining an exact-model spare can reduce the need for cabinet redesign. Confirm the installed revision, supply configuration, and physical arrangement before adding the CM902WM to the critical-spares inventory.
- Ahead of a planned shutdown: Maintenance planners can verify the power-supply model, connected load, upstream protective devices, and replacement availability before the equipment is isolated. For cabinets with limited shutdown windows, completing these checks before the outage helps reduce installation delays.
- When investigating recurring downstream faults: Unstable DC power can resemble individual equipment failures. Check the supply under an appropriate load, inspect terminal connections, and review downstream diagnostic records. A stable output measurement alone does not establish that the entire cabinet is functioning correctly.

Foxboro CM902WM
Migration, Compatibility & Installation Traps
Replacement Compatibility Matrix
| Replacement Scenario | Classification | Required Engineering Checks |
|---|---|---|
| Exact CM902WM replacement with matching configuration | Conditional drop-in replacement | Verify hardware revision, input selection, output rating, mounting, and connected load |
| with a different hardware revision or suffix | Compatibility review required | Compare nameplate details and applicable OEM revision documentation |
| CM902WL or CM902WX substitution | Not confirmed as a direct replacement | Obtain model-specific interchangeability documentation before installation |
| Replacement with a newer-generation power supply | Potential hardware modification required | Verify electrical ratings, mounting, terminals, protection, and system integration |
Replacement decision: Treat the as a candidate for like-for-like replacement, not an automatically approved substitute. The exact installed configuration and the replacement unit’s specifications must be checked before installation.
Field Traps to Watch Out For
Incorrect AC input selection
The supports selectable 100, 120, 220, and 240 VAC input. Verify the selector position against the actual site supply and the OEM instructions before energizing the unit. Never change the selector while the supply is energized. Incorrect selection can damage equipment or create an electrical hazard.
Output loading and model substitution
The documented continuous output is 27.5 VDC at 2.4 A, despite the module’s 3 A rated-class designation. Calculate the actual connected load and check the supply’s permitted operating conditions before approving the replacement. Do not assume that CM902WL, CM902WX, or another supply with similar naming has identical electrical behavior.
Installation precautions: Isolate the AC source, verify the absence of hazardous voltage, and follow site lockout/tagout and electrostatic-discharge procedures. Check the mounting arrangement, terminal connections, grounding, and upstream protection against the applicable documentation before returning the cabinet to service.

Foxboro CM902WM
Quality Assurance SOP
The following procedure defines the proposed pre-shipment inspection and testing process for the Foxboro . Actual results should be recorded against the individual unit being supplied. A visual inspection must not be represented as a completed electrical or functional test.
Identity and Condition Verification
- Perform an OEM anti-counterfeit visual inspection of manufacturer markings, model identification, nameplate consistency, and visible construction details.
- Confirm the complete designation, serial information where available, and hardware revision or suffix.
- Inspect terminals, connectors, accessible components, housing surfaces, and mounting points for corrosion, impact damage, heat discoloration, or unauthorized alterations.
- Photograph the nameplate, front panel, rear heat sink, terminals, and any visible condition issues.
- Record the actual supply condition as New Original, New Surplus, or Used Tested only when supported by the item and its inspection evidence.
Final QA Release and Shipment
- Match the inspection record to the exact model and serial information available for the shipping unit.
- Retain inspection photographs and electrical test results.
- Protect terminals and other exposed electrical interfaces with appropriate packaging.
- Use suitable electronic-equipment packaging and electrostatic-discharge precautions where applicable.
- Document the supplied condition, warranty period, and applicable return terms before shipment.
Procurement recommendation: For the Foxboro , prioritize exact-model identification, input-voltage configuration, verified 27.5 VDC output, and documented unit condition. For a legacy control system, those checks provide a more dependable basis for purchasing a replacement than model naming or physical fit alone.


