Foxboro AD908AC | One Meter Cable for FBM202 Signal Wiring

$2,680.00

The Foxboro AD908AC is identified in supplier listings as a cable accessory associated with the FBM202 thermocouple/mV input path in Foxboro I/A Series distributed control systems.
Brand model:Foxboro
Product Name: AD908AC
Warranty: 1 year
Origin:USA
HS code:85389000.00
Inventory: Spot/Futures
Goods condition: Brand new
Delivery time: 3-4days/1month

Brand: Model/SKU: Foxboro AD908AC

Description

  • Brand: Foxboro
  • Full Model Number: AD908AC
  • System/Series Family: Foxboro I/A Series DCS / FBM202 termination interface
  • Core Function: Cable accessory for connecting the FBM202 thermocouple/millivolt input signal path to its field termination assembly
  • Top 3 Technical Specifications:
    • Product type: Passive cable or field-termination accessory, not an active I/O module
    • Cable length: Approximately 1 m reported in supplier listings; verify the actual assembly
    • Conductor specification: 26 AWG reported in supplier data; confirm against the physical cable markings
  • Stock Status: Confirm physical availability, revision, and unit condition before purchase
  • Condition Options: New Original, New Surplus, or Tested Used, subject to actual inventory inspection
  • Compatibility Check: Exact connector configuration, pin assignment, termination assembly, and cable length
  • Warranty: Coverage and duration specified in the sales quotation

 

Technical Product Introduction

A damaged or incorrectly matched termination cable can interrupt thermocouple measurements even when the control processor and I/O electronics remain operational. The Foxboro AD908AC is identified in supplier listings as a cable accessory associated with the FBM202 thermocouple/mV input path in Foxboro I/A Series distributed control systems. Its role is to maintain the required electrical connection between the field termination arrangement and the input subsystem. It should not be confused with the FBM202 electronic input module itself. Correct part identification matters when restoring furnace temperature measurements, reactor monitoring, or other process signals without unnecessarily replacing functioning I/O hardware.

The FBM202 provides eight isolated thermocouple/mV input channels and can produce new analog input readings every 25 ms, according to its product specification. Its published millivolt input accuracy is ±0.03% of span at 25°C. These figures describe the host input module, not the AD908AC cable. For maintenance teams, the practical benefit of obtaining the correct cable assembly is preservation of the existing signal path, wiring arrangement, and channel identification. A like-for-like replacement can avoid unnecessary field rewiring (provided the original termination assembly, connector layout, and cable configuration are verified). Where a legacy installation is being migrated, connector compatibility must take priority over a similar-looking part number.

Foxboro AD908AC

Foxboro AD908AC

Application Scenarios & Field Realities

  • Furnace and reformer temperature monitoring: When multiple thermocouple circuits feed an FBM202, replacing a damaged termination cable requires checking connector engagement and preserving the original channel mapping. A crossed or intermittent connection can produce misleading process trends.
  • Boiler superheater and economizer measurement: In installations using thermocouple or millivolt signals, intermittent readings may originate from a loose connector or damaged cable rather than a failed input channel. Inspect the cable assembly and termination points before condemning the .
  • Chemical reactor temperature control: For temperature measurements used in cascade control or operating-limit monitoring, an incorrect connection can compromise the integrity of the measurement presented to the controller. Verify the termination assembly and reference-junction compensation arrangement as part of the replacement procedure.
  • Turbine and heat-exchanger temperature trending: Where maintenance staff must restore an existing channel without changing the I/O configuration, a correctly matched cable assembly helps preserve the established signal route. Check the sensor reading against an approved reference source before returning the channel to service.

 

Migration Compatibility & Installation Traps

Replacement Compatibility Matrix

Replacement Category AD908AC Replacement Guidance
Drop-in Replacement Conditional. Use only when the replacement matches the required part number, connector configuration, pin assignment, cable length, and termination arrangement.
Software Compatible No cable firmware or software configuration applies to the passive accessory itself. The existing configuration should remain unchanged for a like-for-like replacement.
Hardware Modification Required Potentially. Differences in connectors, pin assignments, cable length, or termination hardware may require an engineered wiring change or a different approved assembly.
Migration to Another I/O Family Requires engineering verification of the termination hardware, field wiring, signal type, and target system architecture. Do not assume interchangeability based on the connector appearance alone.

Field Traps to Avoid

Part identification: AD908AC is not the input module.

The cable accessory and electronic input module perform different functions. A replacement cable cannot correct a failed input circuit, a defective reference-junction sensor, or a controller communication fault. Before ordering, compare the AD908AC label with the original assembly and confirm the required part number and revision.

Connector and pin-assignment mismatch

For the Type 2 termination-cable arrangement, the documented interface uses a 37-pin D-subminiature connector at the baseplate end and a 25-pin D-subminiature connector at the termination-assembly end. Confirm that the specific assembly matches the installed arrangement; do not infer interchangeability from these connector details alone. Never force a mismatched connector into place.

Reference-junction compensation

The uses a reference-junction temperature compensation arrangement involving an RTD in the appropriate termination assembly. During maintenance, preserve the specified termination assembly and its connections. A cable replacement alone does not resolve a faulty or mismatched reference-junction compensation arrangement.

Before re-energizing the equipment, follow the plant’s isolation, electrical safety, and ESD procedures. Record the original cable routing and terminal assignments before disconnection.

Foxboro FBM216 P0917XQ | Traceable I/A Series Module
Foxboro P0916FJ | CE Industrial DCS Connection Harness
Foxboro FBM207B Compact 16 Channel 24VDC Contact Input Module
FOXBORO FBM217 | 32 Channel Discrete Input Interface Module
FOXBORO FBM203 | 8 Channel Platinum Nickel RTD Input Module
Foxboro AD202MW FBM2XX4 | 16 Channel Analog Input Module
FOXBORO P0916PW FBM217 | 32 Channel Digital Input Module
mingpian
xcd