Description
GE IS215VCMIH2BE VCMI Communication Interface Board
| Attribute | Rating |
|---|---|
| Product type | VME communication interface (VCMI) board and VME bus master for the GE Mark VI control rack |
| Board numbers | IS215VCMIH2BE and IS200VCMIH2BEE, two designations for the same H2 build |
| Functional acronym | VCMI |
| Slot position | Slot 1 of the Mark VI control rack, acting as the bus master for the whole chassis |
| Bus role | Owns the VME bus, enumerates and assigns addresses to the I/O, protection and servo boards in the rack |
| Processor | Texas Instruments TMS320C32 32-bit DSP |
| Memory | 32 KB dual-port SRAM for host/DSP data exchange, 64K × 32 SRAM, 128K × 8 flash |
| Network ports | Three BNC connectors for IONet 10Base2 Ethernet on the front panel |
| Service port | One RS-232C D-sub commissioning port |
| Indicators | Per-port signal LEDs plus board-level run and fault indication |
| Supply | +5 V DC from the VME backplane |
| Form factor | 6U VME board, single slot width, VME64x compliant |
| Weight | Approx 0.45–1.2 kg depending on the build and packing |
| Operating temperature | −30 to +65 °C class, 5–95 % non-condensing humidity |
| Compatibility | The H2 revision and the IS215 / IS200 numbering must match the rack generation; the board also carries the rack configuration, so a replacement needs the correct firmware and node addresses |
| Handling | Rack powered down, IONet cabling and terminators tagged, ESD protection, slot 1 keying checked, bus master start-up and IONet node scan verified |

GE Speedtronic Mark VI / Mark VIe Turbine Control System modules

GE Speedtronic Mark VI / Mark VIe Turbine Control System modules

GE Speedtronic Mark VI / Mark VIe Turbine Control System modules






