Description
GE IS215UCVHM06A VET2-A21010 350-9300007672-12F010A1 UCVH Controller
| Item | Specification |
|---|---|
| Product | UCVH universal VME controller board, the processing card of the GE Mark VI / Mark VIe turbine control |
| Type designation | IS215UCVHM06A, the M06 memory variant of the UCVH controller |
| Companion identifiers | VET2-A21010 is the version identification printed on the assembly; 350-9300007672-12F010A1 is the GE build number covering the configured board |
| Role | Executes the turbine control and protection logic, including fuel stroke reference, acceleration limiting, critical speed avoidance and the trip matrix |
| Architecture | Single-board VME computer acting as system controller on the VME backplane, talking to I/O cards through the rack bus |
| Redundancy | Runs in simplex, dual or triple redundant configuration, with three boards voted 2 out of 3 in TMR |
| Ethernet | Two 10/100 Ethernet ports for the unit data highway and plant network, supporting Modbus TCP and EGD |
| Serial and local service | Two RS-232/485 service ports, plus local display and USB service connections on the faceplate |
| Memory | On-board RAM and flash storage sized by the M06 build, holding the application and the boot image |
| Operating system | QNX real-time operating system |
| Power | Fed from the VME backplane, roughly 12 to 18 W depending on load |
| Indication | Power, run, fault and Ethernet link LEDs on the front panel |
| Dimensions | Approximately 262 mm length, 188 mm width, 21 mm board thickness |
| Weight | Approximately 0.3 kg |

GE Speedtronic Mark VI / Mark VIe Turbine Control System modules

GE Speedtronic Mark VI / Mark VIe Turbine Control System modules

GE Speedtronic Mark VI / Mark VIe Turbine Control System modules






