Foxboro C0136-HZ | Pneumatic Relay Kit for M40G Controllers

$2,980.00

The Foxboro C0136-HZ is identified as a relay replacement kit for the Model 40G pneumatic control relay assembly.
Brand model:Foxboro
Product Name: C0136-HZ
Warranty: 1 year
Origin:USA
HS code:85389000.00
Inventory: Spot/Futures
Goods condition: Brand new
Delivery time: 3-4days/1month

Brand: Model/SKU: Foxboro C0136-HZ

Description

  • Brand: Foxboro
  • Full Model Number: C0136-HZ (also listed as C0136HZ)
  • System/Series Family: Foxboro Model 40G pneumatic control relay
  • Core Function: Replacement kit for servicing the pneumatic relay mechanism in compatible Model 40G control assemblies.
  • Top 3 Technical Specs: Pneumatic relay replacement kit; typical Model 40G response of approximately 1 psi input change to 12 psi output change; replacement components and instructions identified in the applicable parts documentation.
  • Stock Status: Lot-specific availability; confirm actual condition, kit completeness, and warranty coverage before ordering.

 

Technical Product Introduction

A pneumatic controller with a worn relay can develop sluggish output response, unstable pressure regulation, or difficulty driving its downstream control element. The Foxboro C0136-HZ is identified as a relay replacement kit for the Model 40G pneumatic control relay assembly. It addresses mechanical and pneumatic wear within the relay mechanism rather than replacing the complete controller. For maintenance teams supporting legacy process instrumentation, identifying the correct kit before dismantling the instrument helps reduce unnecessary downtime and prevents the purchase of an incompatible assembly.

The Model 40G operating reference describes a typical response in which a 1 psi change in input pressure produces approximately a 12 psi change in output pressure. Actual performance depends on the applicable relay configuration and operating conditions. This pneumatic amplification function is the main technical consideration when evaluating a replacement. Unlike an electronic control module, the C0136-HZ has no processor memory, firmware revision, scan-time rating, or digital communication protocol. Its value lies in restoring the intended pneumatic response while retaining the existing controller and associated process connections. Verify the applicable Model 40G parts list and installation instructions before using the kit on another relay variant.

 

Application Scenarios and Field Realities

  • Refinery pressure-control loops: When a pneumatic controller no longer produces the expected output pressure, inspect the relay mechanism for leakage, diaphragm deterioration, contamination, or mechanical wear. A correctly matched C0136-HZ kit may support restoration without replacing the entire instrument.
  • Chemical process regulation: On older pneumatic control loops, inconsistent valve response can originate in the controller’s relay rather than the final control element. After servicing the relay, verify input-to-output pressure response before attributing the remaining problem to the valve actuator or process dynamics.
  • Boiler and utility systems: Where pneumatic controllers regulate pressure, flow, or temperature, relay performance affects the signal delivered to downstream equipment. During a planned shutdown, check the relay condition alongside the instrument’s calibration and pneumatic supply quality.
  • Legacy instrumentation maintenance: For facilities maintaining Model 40G equipment alongside newer electronic controls, holding the correct mechanical service kit can shorten repair time. Confirm the relay model, mounting arrangement, gasket requirements, and kit contents before scheduling the replacement.
Foxboro C0136-HZ

Foxboro C0136-HZ

 

Migration Compatibility and Installation Traps

Replacement Compatibility Matrix

Replacement Category C0136-HZ Guidance
Drop-in Replacement Conditional; suitable only when the installed relay assembly and applicable parts documentation specify C0136-HZ
Software Compatible Not applicable; the kit services a pneumatic mechanism and does not require a firmware update
Hardware Modification Required Potentially required if the installed relay variant, mounting arrangement, sealing surfaces, or pneumatic ports differ
Cross-Model Replacement Do not assume compatibility with Models 40C, 40D, 40G, or 40K solely because they belong to the same relay family
Calibration Requirement Verify pneumatic response and perform the required controller calibration after installation
Final Compatibility Check Confirm the instrument model, relay identification, parts list, and included kit components before ordering

Field Traps to Check Before Installation

Relay variant and kit completeness

C0136HZ is identified in the applicable parts documentation as a relay replacement kit for Model 40G. Similar-looking relay assemblies may differ in mounting details or service components. Match the complete part number and instrument configuration against the relevant documentation. Also inspect the kit contents before beginning work; a missing seal or incorrect component can delay commissioning.

Pneumatic supply isolation

Before dismantling the relay, isolate the instrument’s pneumatic supply and safely release trapped pressure according to the site’s maintenance procedure. Small passages, sealing surfaces, diaphragms, and moving valve components can be affected by dirt or careless handling. Keep exposed ports clean and use only approved cleaning methods.

Calibration and output verification

Replacing internal relay components can change the instrument’s response. After reassembly, check for leakage, confirm the pneumatic output across the prescribed operating range, and recalibrate the controller according to its applicable instruction manual. Do not return a critical control loop to automatic operation until the required checks pass.

Quality Assurance SOP

The Foxboro is a pneumatic service kit, so quality verification should focus on component identity, kit completeness, mechanical condition, sealing integrity, and pneumatic performance. The following procedure outlines the recommended incoming and pre-shipment inspection workflow.

QA Stage Inspection or Test Action Acceptance Criteria
Part identification Record the marking, available packaging labels, and traceability information Part identification matches the purchase requirement
OEM anti-counterfeit visual inspection Review manufacturer markings, packaging, component finish, machining quality, and available traceability records No unexplained discrepancies; visual inspection alone is not treated as conclusive proof of authenticity
Kit completeness Compare supplied components with the applicable parts list and installation instructions Required service components and documentation are present
Mechanical inspection Examine the diaphragm, spring, ball, seals, linkage parts, and other supplied components as applicable No visible tears, deformation, corrosion, contamination, or damaged sealing surfaces
Dimensional and interface check Compare the service components and mounting interfaces with the approved Model 40G reference Correct fit and interface geometry; no forced assembly or undocumented modification
Pneumatic leakage check Where an approved fixture is available, test the assembled relay under the manufacturer’s specified conditions Leakage remains within the applicable acceptance limits
Input-to-output response test Apply controlled pneumatic input changes and record corresponding output pressure using calibrated instruments Response and stability meet the applicable Model 40G service criteria
Calibration verification Check instrument zero, span, and output behavior as required by the relevant controller instructions Calibration results fall within the documented acceptance limits
Final shipment inspection Recheck part identification, component protection, packaging, quantity, and inspection records Shipped kit matches the quotation and documented inspection status

Important test limitation: A pneumatic relay kit does not have an electronic power-on self-test (POST), RUN/ERR LEDs, or a digital communication interface. Those checks are not applicable to the itself. Pneumatic leakage and input-to-output response tests provide the relevant functional evidence. Any additional testing performed on an installed controller should be recorded separately from inspection of the replacement kit.

For procurement approval, request photographs of the actual kit, its identifying markings, and the included components. Confirm whether the supplied unit is new surplus or previously used, whether the kit is complete, and which warranty applies to the specific lot. The inspection report should distinguish visual checks from completed pneumatic testing so maintenance teams know exactly what was verified before shipment.

Foxboro AD202MW FBM2XX4 | 16 Channel Analog Input Module
FOXBORO P0916PW FBM217 | 32 Channel Digital Input Module
Foxboro FBM217 RH914TR | 32 Channel Discrete Input Module
FOXBORO FDC280 RH101FQ | Field Device Controller Module
FOXBORO FBM233 P0926GX | 10 100 Mbps Redundant Ethernet FDSI Module
Foxboro RH926GH | I/A Series Termination | FBM224 FBM230 FBM231
mingpian
xcd